Manuals / GE / Kitchen Appliance / Range

GE JGBP26GEN, JGBP27GEN installation instructions LM~RTANT Safety Instructions

Models: JGBP26GEN JGBP27GEN

1 52
Download 52 pages 29.2 Kb
Page 35
Image 35

lM~RTANT SAFETY INSTRUCTIONS

Instigation of his range must conform with local codes, or in the absence of local codes, with tie National Fuel Gas Code, ANSI 2223.1, latest edition. In Canada, initiation must conform with the current Natural Gas Installation Code, CAN/CGA-B149.l or the current Propane Initiation Code, CAN/CGA- B149.2, and with 10A codes where applicable.

This range has been design-certified by the American Gas Association according to ANSI 221.1, latest edition and Canadian Gas Association according to CAN/CGA-l.l latest edition. As with any appliance using gas and generating heat, there are certain safety precautions you should follow. You will find these precautions in the Important Safety Instructions in the front of this book. Read them carefully.

●Have your range installed by a qualified installer or service technician.

. H a 30” clearance between cooking surface and overhead combustible material or metal cabinets cannot be maintained, protect the underside of the cabinets above the cooktop with not less than 114” insulating millboard covered with sheet metil not less than 0.0122” thick.

●Clearance between the cooking surface and protected cabinets MUW NE~R BE ~SS THAN 24 INCHES. The vertical distance from the plane of the cooking surface to the bottom of adjacent overhead cabinets extending closer than 1“ to the plane of the range sides must not be less than 18”. (See Dimensions and Clearances illustration in this section.)

●Caution: Items of interest to children should not be stored in cabinets above a range or on the backsplash of a range—children climbing on the range to reach items could be seriously injured.

Q Your range must be electrically grounded in accordance with local codes or, in the absence of local codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code Part 1 and/or local codes. See Electrical Connections in this section.

● Before installing your range on linoleum or

any other synthetic floor covering, make sure

the floor covering can withstand 180°E without

shrinking, warping or discoloring. Do not install

the range over carpeting unless a sheet of 1/4”

thick plywood or similar insulator is placed

between the range and carpeting.

● Make sure the wall coverings around the

•~

PA;8

d

;C4

A

WARNING

Al ranges can tip and injury could result. To prevent accidental tipping of the range, attach an approved Anti-Tip device to the wall. (See Installing the Anti-Tip Device in this section.) To check if the device is installed and engaged properly, carefully tip the range forward. The Anti-Tip device should engage and prevent the range from tipping over.

range

can withstand heat generated by the

range

up to 200°F.

c Avoid placing cabinets above the range. To reduce the hazard caused by reaching over the open flames of operating burners, install a ventilation hood over the range that projects forward at least 5“ beyond the front of the cabinets.

● The ventilating hood must be constructed of sheet metal not less than 0.0122” thick. Install above the cooktop with a clearance of not less thm 1/4” between the hood and the underside of the combustible material or metal cabinet. The hood must beat least as wide as the appliance and centered over the appliance. Clearance between the cooking surface and the I

ventilation hood surface MUST N~R BE :,;!~ ‘i

~SS THAN 24 INCHES.

I

‘\.)} !;

 

,,,

 

●H cabinets are placed above the range, allow a f ! minimum clearance of 30” between the cooking . surface and the bottom of unprotected cabinets.

If you pull the range out from the wall for any reason, make sure the Anti-Tip device is engaged when you push the range back against the wall.

●For your safety, never use your range for warming or heating the room. Your oven and range top are not designed to heat your kitchen. Top burners should not be operated without cookware on the grate. Such abuse could result in fire and damage to your range and will void your warranty.

●Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Explosions or fires could result.

●Do not use oven for a storage area. Items stored in the oven can ignite.

●Do not let cooking grease or other flammable materials accumulate in or near the range.

35

Page 34 Page 36
Page 35
Image 35
GE JGBP26GEN, JGBP27GEN installation instructions LM~RTANT Safety Instructions
Page 34 Page 36

JGBP26GEN, JGBP27GEN specifications

The GE JGBP27GEN and JGBP26GEN are two exceptional gas ranges that stand out in the market for their advanced features and user-friendly technologies. Both models cater to home chefs looking for precision in cooking, reliability, and a sturdy design that can withstand the rigors of daily use.

The GE JGBP27GEN features a spacious 5.0 cu. ft. oven capacity, providing ample room for large meals, whether it's a holiday feast or a weeknight dinner. This range is equipped with an extra-large oven window that allows users to monitor their cooking without opening the door, thus maintaining optimal temperatures. The oven also boasts a self-cleaning feature, utilizing high heat to eliminate food residue, making upkeep effortless for busy homeowners.

On the other hand, the JGBP26GEN presents a similar oven capacity but comes with a slightly more simplified design, yet it does not compromise on performance. Both models utilize a powerful 15,000 BTU burner, which ensures rapid heating and efficient cooking. With multiple burners ranging from simmer to high-heat settings, users have the flexibility to prepare a variety of dishes simultaneously.

A standout feature of both the JGBP27GEN and JGBP26GEN is their continuous grates, crafted from durable cast iron. These grates provide a stable cooking surface, allowing cookware to glide easily from burner to burner. This design is particularly advantageous for users who employ multiple pots and pans at once.

In terms of additional technologies, both models come equipped with a precise simmer burner that can maintain low temperatures ideal for delicate sauces and simmering tasks. The ranges also include an integrated electronic ignition system, which offers reliable and efficient ignition without the need for matches or lighters.

For aesthetics, both ranges are available in a classic stainless steel finish that adds a modern touch to any kitchen decor. The controls are conveniently located at the front, ensuring ease of use while cooking.

In summary, the GE JGBP27GEN and JGBP26GEN gas ranges combine modern functionality with user-oriented features, making them suitable choices for any cook. Their spacious ovens, powerful burners, and ease of maintenance speak to the needs of both novice cooks and seasoned chefs, making meal preparation enjoyable and efficient.