Golden Technologies GB116 owner manual Seat Rotation Lever, Seat Height Adjustment

Page 20

Buzzaround XL Owner’s Manual

RevA_092210

V. OPERATION

Figure 8: Seat Rotation Adjustment

Seat Rotation Lever

The seat can be rotated through 360° and locked at any 45° position.

1.Pull up on the seat rotation lever and rotate the seat to the desired position. See figure 8.

2.Release the handle to lock the seat at any 45° position.

Figure 9

Figure 10

Figure 11

Seat Height Adjustment

To adjust the seat height:

1.Pull up on the seat rotation lever and lift the seat up and off of the seat pedestal. See Figure 9.

2.Remove the battery box by lifting it up. See figure 10.

3.Remove the detent pin or nut and bolt that holds the seat post in the seat pedestal. See Figure 11.

4.Position the seat post at the desired height while aligning the holes in the seat post and the seat pedestal.

5.Reinstall the detent pin or nut and bolt.

6.Pull up on the seat rotation lever when placing the seat back on the seat post.

19

Image 20
Contents U R L I F E I N M O T I O N Model GB116RevA092210 Disclaimer Contents Introduction Features and Benefits Delta Tiller handleAccessories for the Buzzaround XL Scooter II. Safety Maximum WeightBefore Getting on Your Buzzaround XL Getting on Your Buzzaround XLDriving on Inclines Driving Down a DeclineProcedure 1 Under Power Procedure 2 Emergency No PowerDismount your Buzzaround XL Motor Braking SystemRules for USE and Other Safety Considerations MedicationRules for USE and Other Safety Considerations EMI/RFI Recommendations III. EMI/RFIEMI/RFI and Your Buzzaround XL IV. Your Golden Buzzaround XL For Your RecordsSpecification GB-116 Weight of Unit assembledTires Standard SeatSpecifications GB-116 Optional Seat WarrantySpeed Adjustment Dial Key SwitchOperation Horn ButtonDelta Tiller Adjustment Armrest Angle Armrest Width AdjustmentFlip-up Armrests Seat Height Adjustment Seat Rotation LeverFreewheel Mode Freewheel LeverVI. Riding Your Buzzaround XL Mounting Before Getting on Your Buzzaround XLBasic Driving SteeringSteering in a Tight Spot Steering in ReverseControl Through Tight Spots VII. Disassembly DisassemblyRemove the Battery Pack Remove the SeatSeparate the Drivetrain from the Frame Remove the Tiller BasketFold Down and Lock the Tiller VIII. Assembly Injury Hazard DUE to Improper AssemblyReinstall the Drivetrain Install the Battery PackInstall the Tiller Basket Raise the TillerInstall the Seat Unlock the TillerIX. Transporting Your Buzzaround XL To Transport Your Buzzaround XLCare and Maintenance Routine MaintenanceTo Charge the Batteries Battery MaintenanceBatteries and Charging Resetting the Main Circuit Breaker Main Circuit BreakerPossible causes for the main circuit breaker to trip RemedyBeep BeepsCare and Maintenance Scooter has exceeded the Push or Rollaway speed limits XI. Warranty Scooters Effective June 1Scooters XII. WARRANTY/REGISTRATION Form Mail Completed Form toRevA092210 RevA092210 Model GB116