Before You Begin
Remove contents from box. Remove the plastic separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the Pocket Mod is 95 percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.
WARNING:
DO NOT USE
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult. Allow up to 15 minutes for assembly.
Allow up to 18 hours for initial charge (see page 3 for charging information).
Brake Lever
Throttle 
Charger
The Pocket Mod has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible.
On/O
Switch
Charger Port
Charger
Plug
Charger Port
Storage Compartment
Under Seat
Kick Stand
Chain Guard
Required Tools
3mm (Daisy only), | 14mm (Daisy only) | Spoke tightener | Phillips screwdriver | ||
5mm and 6mm key wrenches | and15mm wrenches | (Included) | for Schrader valve tires, | ||
(Not Included) | |||||
(Included) | (Included) |
| with pressure gauge | ||
|
| ||||
2.5mm key wrench | 8mm and 10mm wrenches |
| (Not Included) |
| |
(Not included) | (Not Included) |
|
|
|
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call
2