Razor 15130667, 15130650 Repair and Maintenance, Testing the Brakes, Adjusting the Brakes

Page 6

Repair and Maintenance

Turn power “OFF” before conducting any maintenance procedures.

Testing the Brakes

To use the brake, squeeze the lever to increase the pressure on the brake. The brake lever is fitted with a cable adjuster to compensate for cable stretch and/or to fine-tune the lever movement to brake engagement. If brake is not engaging properly, follow instructions for adjusting the brakes.

qAdjusting the Brakes

Tools required: 10mm wrench

WARNING: The brake is capable of skidding the tire and throwing an unsuspecting rider.

Practice in an open area free from obstacles until you are familiar with the brake function. Avoid skidding to a stop as this can cause you to lose control or damage the rear tire.

Note: The brake lever contains a safety switch to cut power to the motor when the brake is applied. In an emergency, applying the brake will always stop the product from moving. Do not disable or replace this lever with anything other than a genuine Razor replacement part.

1 To adjust the play, thread the brake lever adjuster on the hand brake in or out 1/4 to 1/2 turn until the desired brake adjustment is attained. Most adjustments are complete at this step. If brake still needs further adjustment, proceed to step 2.

2If brake is too tight or has too much slack, use a 10mm wrench to loosen the nut for additional adjustment on the brake cable on the rear wheel. Securely tighten nut when done.

qChain and Rear Tire Replacement

Tools required: Phillips screwdriver, 10mm wrench, two (2) 8mm wrenches, and two (2) 15mm wrenches.

1 With a Phillips screwdriver, remove the screws that secure the chain guard. Remove chain guard.

4With two 15mm wrenches, loosen the axle. Slide the wheel forward to loosen the chain and remove the wheel. Note the sequence of the hardware. Note: Your hands will get greasy doing this.

2With two 8mm wrenches, loosen brake housing anchor and disconnect. Keep the spacer and washers together

5 Install the new chain or wheel by slipping the chain around the axle. Slide the axle into the slots on the frame. Slide the wheel forward and maneuver the chain onto the rear sprocket, motor shaft and chain tensioner.

3With a 10mm wrench, loosen the brake cable anchor and discon- nect the cable.

Note the sequence of the hardware:

Right Side (Throttle) Safety hook

3/8 Axle locknut

Left Side (Brake)

Spacer

Safety hook 3/8 Axle locknut

5

Image 6
Contents Do not Return to Store Little Red 15130658 Hello Kitty 15130664Contents Safety WarningsDo not ride at night or when visibility is impaired Required Tools Estimated Assembly and Set-Up TimeBefore You Begin ChargerAttaching the Front Wheel Assembly and Set-UpAttaching the Handlebars Checking Spoke TensionInitial charge time 18 hours Charging the BatteryInflating the Tires Recharge time up to 12 hoursAdjusting the Brakes Repair and MaintenanceTesting the Brakes Chain and Rear Tire ReplacementReplacing the Fuse Charger Battery Care and DisposalReplacement Parts Repair Centers WheelsTroubleshooting Guide Problem Possible Cause SolutionSingle Speed Twist Grip Throttle 02-1 Sleeve Handlebar Brake Lever AssemblyPocket Mod Parts Control ModuleSB 1918 California Declaration Brake Safety Gear Safety remindersWarranty Loose Parts Tire Inflation

15130667, 15130630, 15130650, 15130658, 15130601 15130612 specifications

Razor has consistently set the benchmark for high-performance electric scooters, and the models 15130610, 15130661, 15130601, 15130612, 15130658, and 15130650 highlight this legacy. Each of these scooters integrates cutting-edge technologies and features designed for both reliability and comfort.

One of the standout characteristics across these Razor models is their impressive electric motor, which delivers high torque for quick acceleration and smooth cruising. Whether you are navigating urban landscapes or enjoy leisurely rides, the robust motor ensures efficiency and performance. The top speeds for these models vary, but they typically reach between 15 to 18 miles per hour, making them suitable for both commuting and recreational use.

Battery performance is another significant factor. These scooters come equipped with high-capacity lithium-ion batteries that provide decent ranges, generally around 10 to 15 miles on a single charge. This makes them ideal for students or professionals who need reliable transportation without the hassle of frequent recharging. Furthermore, the charging time is relatively short, taking approximately 4 to 5 hours to reach full capacity.

Safety is paramount in all Razor models, and these scooters are no exception. Each unit features a robust frame constructed from high-quality materials, ensuring durability while also maintaining a lightweight profile for easy handling. Safety features include a reliable braking system, often with both an electric brake and a conventional rear brake, offering riders responsive stopping power.

Additional features include adjustable handlebars for customizable comfort and an easy-to-read LED display that shows speed, battery life, and other essential ride metrics. Some models also offer enhanced shock-absorption technology, ensuring a smoother ride on uneven surfaces.

The aesthetic appeal of these scooters has not been overlooked either; they come in various colors and sleek designs, making them not only functional but stylish.

In summary, Razor models 15130610, 15130661, 15130601, 15130612, 15130658, and 15130650 exemplify the perfect combination of speed, safety, and style, making them an excellent choice for anyone looking to invest in a reliable electric scooter for daily use or leisurely rides.