Razor 13111290 Sometimes the scooter Loose wires or connectors, Noises or grinding sounds

Page 11

Problem	Possible Cause	Solution

Sometimes the scooter	Loose wires or connectors	Check all wires around the motor and all connectors to make sure
doesn’t run, but other		they are tight.
times it does	Motor or electrical switch	Contact your local Razor authorized service center for diagnosis and
	Motor or electrical switch
	damage	repair.

Scooter makes loud	Chain is too dry	Apply a lubricant such as 3 in 1TM or Tri-FlowTMto the chain.

noises or grinding sounds

For more helpful troubleshooting guides, visit us at www.razor.com.

Image 11

Contents Do not Return to Store Repair and Maintenance ContentsSafety Warnings Proper Riding Attire Required Tools Estimated Assembly and Set-Up TimeBefore You Begin Inflating the Tire Assembly and Set-UpCharging the Battery Attaching the HandlebarsBrake Installing Spark BarSafety Gear BatteryInstall replacement wheel Repair and MaintenanceAdjusting the Brakes Front Wheel ReplacementRe-attach the chain guard Chain and Rear Wheel ReplacementWhen to Replace the Spark Cartridge Open wrenchesReplacing the Spark Cartridge Using the Spark BarBattery Care and Disposal Replacement Parts Repair CentersTroubleshooting Guide Noises or grinding sounds Sometimes the scooter Loose wires or connectorsDamage Repair Scooter makes loud Chain is too dry Parts SB 1918 California Declaration Razor Limited Warranty Warranty