Razor 13111290 owner manual Chain and Rear Wheel Replacement, When to Replace the Spark Cartridge

Repair and Maintenance

qChain and Rear Wheel Replacement

Tools required: Phillips screwdriver, 10mm open wrench, two (2) 8mm open wrenches, and two (2) 13mm

open wrenches.

Note: Rear wheel hardware sequence

18-1

18-2

18-4 18-3

18-7 18-6

18-8

18-5

18-3 18-4

1 With a Phillips screwdriver, loosen the two screws on the chain guard and remove the chain guard.

4Remove wheel and install replacement wheel.

(Note the sequence of the hardware)

7 Re-attach the chain guard.

2 Using two 13mm open wrenches, loosen the locknuts by turning the wrenches counter clockwise.

5 Push the chain tensioner down to install the chain on both sprockets.

3To loosen the chain, push the tensioner down to create some slack in the chain.

6 With two 13mm open wrenches, re-tighten the locknuts.

18-2

18-1

Left Side (Brake)

18-1 Locknut

18-2 Lock washer

18-3 Flat washer

Frame

18-4 Thick washer

18-6 Spring

18-7 Spring housing

18-8 (Long) spacer

Right Side (Throttle)

18-1 Locknut

18-2 Lock washer

18-3 Flat washer

Frame

18-4 Thick washer

18-5 (Short) spacer

qWhen to Replace the Spark Cartridge

Spark cartridge will continue to emit sparks until it is worn to the indicator line.

Indicator line

7