Quantum Q6 Edge HD manual Power Chair Securement Points

I V . A S S E M B L Y

Power Chair Securement Points

This power chair may be equipped with four (4) tie- down points for the purpose of securing the unoccu- pied power chair during motor vehicle transport. Each tie-down point is clearly labeled for this purpose.

To secure a power chair equipped with tie-down points:

„Always secure the power chair in a forward-facing position in the vehicle.

„Attach the four tie-down straps only to designated, labeled transit securement points indicated by anchor symbols on the power chair. See figure 13. Tighten the straps to sufficiently remove all the slack.

„Never attach tie-downs to adjustable, moving, or removable parts of the power chair such as arm- rests, front riggings, and wheels.

„Position the anchor points for the rear tie-down straps directly behind the rear securement points on the power chair. The front tie-down straps should be anchored to floor points that are spaced wider than the power chair to provide increased stability.

See figure 14.

MANDATORY! The power chair should be used as indicated in the manufacturer’s instructions. If you have any questions about the proper use of your power chair, contact your Quantum Rehab Provider.

WIRE TIES

TO POWER BASE

Figure 12. Controller Harness Routing on a Contour Seat

SECUREMENT BRACKETS

SECUREMENT BRACKETS

Figure 13. Transit Securement Brackets

Q6 Edge HD www.pridemobility.com 23