Folding the Wheelchair
To fold the wheelchair, it is necessary to remove certain components. Follow these simple guidelines:
1.Park the chair on a level surface.
2.Ensure the wheels are in drive mode.
3.Fold up footplates and/or remove the entire leg rest assemblies (see Figures 8, 10 and 11).
4.Disconnect the black and red connectors situated under the seat (Figure 7).
5.Carefully pull out the first rear battery out of the basket by using the lifting strap (battery is heavy). Then pull out the battery basket by lifting up.
6.Slide second battery forward and follow the same steps as 5. to pull out the second battery and basket
7.Remove seat cushion, carefully place hands under the seat bottom and give a sharp pull upward. This will pull the entire frame together (Figure 8).
Lifting Straps | Pull Seat Bottom | |
Upward | ||
|
Connectors 
Battery
Basket
Figure 7
Figure 8
6/25/200412