SCOOTER TILLER CONTROLS (FIG. 11A&B)
Speed Controls
The speed control allows you to set a speed between 1 (minimum) and 10 (maximum).
Battery Level Indicator
The number of LED bars lit, shows the amount of charge left in your batteries. The amount of charge will only show at its true level when the scooter is in drive.
Caution – Do not allow the LED bars go out completely as complete discharge of the batteries
could cause irreversible damage.
Lights
A blue colored button at the rear of the tiller operates the lights.
Horn
A yellow button at the rear of the tiller operates the horn.
Thumb/Finger Lever Controls
The left thumb/finger lever controls the reverse and the right thumb/finger lever controls the forward motion. The amount of pressure applied to each lever will determine the speed the scooter travels at. Release the lever and the scooter will slowly come to a stop and the electromagnetic brake will be applied.
On/Off Key Switch
Insert the key in the right side of the tiller. Turn the key and the LED bars will light up. There is a delay before the thumb/finger lever control can be operated, while the controller is checking the circuits.
Indicator Switch |
| Speed | |
| Controls | ||
Operates turn indicator lights. |
|
|
|
|
|
| |
Battery Level |
| ||
|
| ||
Hazard Warning Switch | Indicator |
| |
|
|
| |
A red button operates all indicator flashers.
Horn
Figure 11A
Battery Level Indicator
Speed
Controls
Key Switch
Thumb Lever
Control
Light
Indicator
Switch
Lights
Finger
Lever
Control
Figure 11B
5/11/20049
Hazard
Lights
Key
Switch