I I I . I N S T A L L A T I O N
6. Reinstall the
WARNING! Before operating the lift, inspect the wiring harness for proper routing and grounding. Improper routing can cause damage to the harness, and improper grounding can cause damage to the electrical system.
Onboard Battery Installation
The optional onboard battery is designed for easy installation as it does not require any wires to be routed through or under the vehicle.
Follow these steps to install the onboard battery:
1.Remove the rubber caps and nuts from the protrud- ing bolts on the side of the lift motor housing. See figure 6.
2.Mount the battery case onto the protruding bolts and secure into position with the nuts removed earlier. See figure 6.
3.Insert the onboard battery into the battery case, making sure that the connector on the bottom of the battery aligns and fully connects with the mating connector inside the battery case.
4.Connect the male connector on the battery cable to the female connector at the base of the Back- packer.
5.Secure the battery cable to the other cables with wire ties.
PROTRUDING BOLTS |
Figure 6. Onboard Battery Installation
12 | www.pridemobility.com | Backpacker |