V . D I S A S S E M B L Y
4. Flip up the safety latch.
WARNING! Make sure latch is flipped down before using your power chair.
5.Squeeze together the two seat latches and lift the seat up enough to release it from the front seat bar. See figure 9.
6.Hold the seat at the base of the seatback and the front of the seat base.
7.Lift the seat off the power base and set it aside.
WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose control of the seat if they do so, resulting in personal injury and/or damage to the chair.
8.Unplug the left and the right motor connectors. See figure 6.
9.Push down both battery box release levers. See figure 10.
CAUTION! Make sure that both battery box release levers are in the up (locked) position during reassembly.
10.With one hand, hold the front battery box by the handle. See figure 8.
11.With the other hand, hold the back battery box by the grip on the back (see figure 6) and pull it rear- wards until you disconnect it from the front battery box.
12.Slide the rear battery box off the frame and set aside.
13.Slide the front battery box rearward and lift it off the frame. Set it aside.
14.Remove the ball detent pin from the footrest bracket. See figure 11.
BALL DETENT PIN
Figure 11. Footrest Bracket
FRONT
SEAT LATCHES
Figure 9. Seat Latches
BATTERY BOX RELEASE LEVER (IN DOWN POSITION)
Figure 10. Back Battery Box Release Lever
SEAT FRAME BRACKET
BALL DETENT PIN
SEAT TOWER
Figure 12. Front Seat Tower
Jazzy 1133 Owner’s Manual Rev B | www.pridemobility.com | 21 |