I V . A S S E M B L Y
Seat Installation
It may be necessary to install the seat either prior to initial operation or after transporting your power chair. The seat is attached to the power base by a
WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose control of the seat if they do so.
To install the seat:
1. Adjust the seat height if necessary. See V. “Comfort Adjustments.”
2. Set the seat onto the seat pedestal. See figure 9.
3. Install the controller into the armrest, and tighten the setscrew under the armrest.
4. Lift the armrest straight up, then route the controller cable and secure with
WARNING! Prevent controller harness damage! Use correct
Figure 9. Seat Installation
5.Plug the controller cable into the connector on the power base. See figure 6.
Select Traveller | www.pridemobility.com | 23 |