IX . D I S A S S E M B LY
8.Lift both batteries off the scooter.
9.Remove the detent pin that secures the front and rear sections together. See figure 15.
10.Completely lower the tiller to the center of the scooter deck. See VIII. “Comfort Adjustments.”
NOTE: Steer the tiller to the right before lowering it. The tiller will sit slightly to the left when fully lowered.
11.Pull up on the handhold (located on the front sec- tion) and push back on the seat post, then gently separate the sections of the scooter. See figure 16.
A N D A S S E M B LY |
Figure 14. Front-To-Rear Harness
DETENT PIN |
Figure 15. Detent Pin Removal
HANDHOLD
Figure 16. Frame Separation
Sundancer | www.pridemobility.com | 31 |