Pride Mobility GC2 manual On/off key turns the system on and off

Page 12

12

Basic Operation Instructions

Battery Condition Meter

On/Off Key

Horn Key

Speed Dial

Joystick

Figure 3. Controller Keypad

Control Panel

The control panel is located directly in front of the joystick. It contains keys and a dial that you will use to control your power chair. See figure 2.

On/Off Key

The on/off key turns the system on and off.

WARNING! Unless faced with an emergency situation, do not use the on/off key to stop the chair. This will cause the power chair to stop abruptly.

WARNING! Always turn the power off when you are stationary to prevent unexpected movement.

Horn Key

The horn key activates a warning horn.

GC2 Controller

www.pridemobility.com

Image 12
Contents GC2 Controller Safety Guidelines Table of Contents Product Safety Symbols Label InformationIntroduction PURCHASER’S AgreementInformation Exchange My authorized Pride Provider Is Precautionary Guidelines GC2 ControllerElectromagnetic and Radio Frequency Interference EMI/RFI GC2 Controller Features GC2 Components and Connections Operating the GC2 Controller GC2 controller system consists of see figureOn/off key turns the system on and off Controller Communication Connector Speed DialLock Mode Thermal RollbackFault Codes Fault Probable Causes Possible Solution CodeCare and Maintenance Warranty Basic Operation Instructions Notes GC2 Controller Basic Operation Instructions Notes INFMANU3785