Pride Mobility GC2 manual Label Information, Product Safety Symbols

Page 4

4

LABEL INFORMATION

Basic peration Instructions

PRODUCT SAFETY SYMBOLS

The symbols below are used on the controller to identify warnings, mandatory actions, and prohibited actions. It is very important for you to read and under- stand them completely.

Read and follow the information in the owner’s manual.

Avoid exposure to rain, snow, ice, salt, or standing water whenever possible. Maintain and store in a clean and dry condition.

EMI-RFI - This product has been tested and passed at an immunity level of 20 V/m.

Disposal and recycling - Contact your authorized Pride Provider for information on proper disposal and recycling of your Pride product and its packaging.

Use correct tie-down points for controller harness to prevent the harness from getting caught in the drive tires, pinched in the seat frame, or damaged when passing through doorways.

GC2 Controller

www.pridemobility.com

Image 4
Contents GC2 Controller Safety Guidelines Table of Contents Product Safety Symbols Label InformationPURCHASER’S Agreement IntroductionInformation Exchange My authorized Pride Provider Is Precautionary Guidelines GC2 ControllerElectromagnetic and Radio Frequency Interference EMI/RFI GC2 Controller Features GC2 Components and Connections Operating the GC2 Controller GC2 controller system consists of see figureOn/off key turns the system on and off Controller Communication Connector Speed DialLock Mode Thermal RollbackFault Codes Fault Probable Causes Possible Solution CodeCare and Maintenance Warranty Basic Operation Instructions Notes GC2 Controller Basic Operation Instructions Notes INFMANU3785