Pride Mobility Cantilever Lift System manual Cantilever Lift Operation Europa, Europa Controller

Page 11

Basic Operation Instructions

11

CANTILEVER LIFT OPERATION - EUROPA

To operate the cantilever lift:

1.Bring your power chair to a complete stop.

2.Press an actuator select key until an “A” appears in the drive mode and actuator display. See figure 5.

3.Pull the joystick back to raise the lift. Push the joystick forward to lower the lift. Once the lift reaches its highest extension and the lift action stops, you should continue to hear and/or feel the lift motor running. This is because there is a clutch mechanism that allows the motor to continue running after the lift has reached its limit. This clutch works at both the top and bottom extensions of the lift. When you release the joystick, the lift motor will stop.

NOTE: Do not allow the motor to run more than a few seconds after the mechanism reaches the top or bottom limit.

4.Press the drive program select key until a number appears in the drive mode and actuator display.

Figure 5. Europa Controller

Cantilever Lift System

www.quantumrehab.com

RevA/Nov03

Image 11
Contents Cantilever Lift System Product Safety Symbols Table of Contents PURCHASER’S Agreement SafetyInternet and Private Purchases Pride OWNER’S Club Information ExchangeCantilever Lift System Cantilever Lift SystemUse Lift on Flat, Hard, Level Surface Only Vibe with Cantilever Lift System Specifications To operate the cantilever lift Cantilever Lift Operation VSIRemote Plus Controller Cantilever Lift Operation Remote PlusEuropa Controller Cantilever Lift Operation EuropaTo adjust the seat dump Seat Dump AdjustmentSeat Dump Adjustment Contoured Seat UMS Seat Position AdjustmentMonth Limited Warranty Quality Control Cantilever Lift System