Specifications |
| Features | |
Drive wheels | 14” | . | |
Front: 5” solid | for maximum stability | ||
. Compatible with | |||
| Rear: 6” solid | ||
Suspension | . | ||
| integrated rear | ||
| on front and rear prevent wheel | ||
| and articulating caster beam | ||
| . | ||
Maximum speed | Up to 6.5 mph 1 / Up to 8 mph 1,2 | ||
Brakes | Intelligent Braking | . ATX Suspension | |
| (electronic, regenerative disc brakes) | incorporates front | |
Ground clearance | 3.5” | performance over more varied terrain | |
. | |||
Turning Radius 4 | 22” | ||
Overall Size 4 | Length: 37” Width: 25.875” | . Accepts (2) Group 24 & (1) | |
SEATING | Synergy® Seat | with a vent tray | |
| |||
| Adjustable Width: |
| |
| Adjustable Depth: | Options | |
| Adjustable Width: | ||
|
| ||
| Adjustable Depth: | . Solid tires | |
| |||
Drive train | . | ||
Batteries | Two 12 volt, deep cycle Group 24 | . | |
range per charge 1 | Up to 20 miles | . Elevating leg rests | |
Battery Charger | 8A, Lester | . Oxygen tank holder | |
|
| ||
AVAILABLE | 70A and 100A, PG Remote Plus | . Neoprene leg rest sleeves | |
Electronics | 70A and 100A, | ||
Weight Capacity | 300 lbs. maximum (user weight) | . Gel adductor buttons | |
base weight | 170 lbs. | . Vent tray | |
Battery Weight | 53.5 lbs. (each) | . | |
Warranty | Lifetime limited warranty on frame | . | |
| . | ||
| |||
| . 70° | ||
|
| ||
Shroud Colors |
| . | |
| . | ||
|
| . Contoured seating with solid seat pan | |
|
| Code Coverage |
Metallic | Metallic | Metallic | Metallic | Sunburst | Q6000 3SP - SS | ||
Red | Blue | Silver | Black | Orange | |||
|
|
|
|
| Q6000 | 3MP - SS | |
|
|
|
|
| Q6000 | 4S | - SS |
|
|
|
|
| Q6000 | 4S | - C |
Q6000 4SP - SS
Q6000 4MP - SS
(Code: K0856)
(Code: K0861)
(Code: K0868)
(Code: K0869)
(Code: K0877)
(Code: K0884)
(US)
FOOTNOTES:
1)Range and speed vary with user weight, terrain type, battery charge, battery condition and tire pressure.
2)8 mph with high speed motor package; standard on Group 4 units; optional on Group 3 units
3)100 amp controller required with high speed motors
4)Due to manufacturing tolerances and continual product improvement, this specification can be subject to variance of + or – 3 %.