| V I I . C A R E A N D M A I N T E N A N C E |
| |||||
Follow these easy steps for a quick and safe replace- | AXLE KEY |
| |||||
ment of solid tires: |
|
|
|
|
| ||
|
|
|
|
|
| ||
1. | Turn off the power to the controller. |
|
|
|
| ||
2. | Make sure that the power chair is in drive mode. See | DRIVE |
| ||||
| figure 4. |
|
|
|
|
| |
3. |
|
|
|
| WHEEL |
| |
Raise and support the power base so that the wheel is | AXLE |
| |||||
| at least 1 in. (2.54 cm) off of the ground. |
| MOTOR | ||||
4. | Remove the drive wheel nut and washer from the axle. | SLOT | |||||
| See figure 17. |
|
|
|
|
|
|
5. | Remove the drive wheel from the axle. Make sure that |
|
| ||||
| you keep the axle key. |
|
|
|
|
| |
6. | Replace the entire assembly. |
|
|
|
| ||
7. | Slide the wheel back onto the axle. Make sure that the |
|
| ||||
| axle key is in the axle slot. |
|
| DRIVE WHEEL WASHER |
| ||
|
|
|
|
|
|
| |
| WARNING! Ensure that the axle key is | DRIVE WHEEL NUT |
| ||||
| properly installed into the axle slot when |
| |||||
|
|
| |||||
| mounting the wheel. If not installed |
|
| ||||
| securely, | the | braking | system | is | Figure 17. Jazzy Elite Series Drive Wheel Removal | |
| disengaged which may cause personal | ||||||
|
|
| |||||
| injury and/or product damage may result. |
|
| ||||
8. Reinstall the drive wheel nut and washer onto the axle and tighten. See figure 17.
WARNING! Make sure both the nut and the washer are reinstalled and tightened properly.
9. Remove the power chair from the base support.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be replaced with a new nylon insert lock nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or by contacting your authorized Pride Provider.
Battery Replacement
A battery wiring diagram is printed on a decal located on the power base. See VI. “Batteries and Charging” for correct battery specifications.
MANDATORY! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hands after handling.
WARNING! The batteries in your power chair should only be serviced or replaced by an authorized Pride Provider or a qualified technician.
WARNING! Do not replace batteries when seat is occupied.
WARNING! Power chair batteries are heavy. Refer to the product specifications. If you are unable to lift that much weight, be sure to get help. Use proper lifting techniques and avoid lifting beyond your capacity.
WARNING! Do not mix old and new batteries. Always replace both batteries at the same time.
PROHIBITED! Keep tools and other metal objects away from the battery terminals. Contact with tools can cause electrical shock.
26 | www.pridemobility.com | Jazzy Elite Series |