Pride Mobility 1400 Locking/Unlocking the VSI, Off-board Charger Socket, Controller Connector

Page 30

V I I . O P E R A T I O N

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your Go-Chair to prevent unauthorized use.

To lock the VSI:

1.With the VSI switched on, press and hold the on/off key. After 1 second, the VSI should beep.

2.Release the on/off key.

3.Push the joystick to the full forward position until the VSI beeps.

4.Pull the joystick to the full rearward position until the VSI beeps.

5.Release the joystick. There should be a long beep.

6.The VSI is now locked.

To unlock the VSI:

1.Press the on/off key and power on the VSI. The maximum speed/profile indicator should ripple side to side.

2.Push the joystick to the full forward position until the VSI beeps.

3.Pull the joystick to the full rearward position until the VSI beeps.

4.Release the joystick. There should be a long beep.

5.The VSI is now unlocked.

NOTE: If the above procedure fails to either lock or unlock the VSI, contact an authorized Pride Provider.

Off-board Charger Socket

You may use an off-board charger to charge the Go-Chair batteries through the 3-pin socket located on the front of the VSI. The off-board charger current should not exceed 5 amps. Contact an authorized Pride Provider for more information.

WARNING! Only authorized Pride chargers should be connected to the off-board charger socket. See an authorized Pride Provider for more information.

NOTE: The off-board charger socket on the controller should be used when charging the batteries with the battery box installed on the power base.

Controller Connector

This connects the VSI to the travel chair’s batteries, motors, and motor brakes.

Sleep Mode

The VSI controller is equipped with a sleep mode feature. Sleep mode is a built-in circuit that automatically shuts off the main power if the joystick is not moved in any direction for a preset period of time. The battery condition meter lights on the keypad indicate sleep mode by blinking once every five seconds. To restore power and continue, push the on/off key twice.

30

www.pridemobility.com

Go-Chair

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Exeter, PA St. Catharines, on F E T Y G U I D E L I N E S N T E N T S IIIPURCHASER’S Agreement SafetyN T R O D U C T I O N Internet and Private PurchasesPride Owners Club Quick Reference InformationProduct Safety Symbols S a F E T YS a F E T Y Pre-Ride Safety Check ModificationsWeight Limitations Incline InformationPublic Streets and Roadways Freewheel Mode Braking InformationCornering Information Outdoor Driving Surfaces Stationary Obstacles Steps, Curbs, etcStairs and Escalators Elevators TransfersDoors Lift/Elevation ProductsPositioning Belts Reaching and Bending Inclement Weather PrecautionsMotor Vehicle Transport BatteriesAlcohol Electromagnetic and Radio Frequency Interference EMI/RFII . Y O U R G O C H a I R GO-CHAIRGO-CHAIRSPECIFICATIONS Go-Chair Power Base Electrical ComponentsManual Freewheel Levers To engage or disengage the drive systemANTI-TIP Wheels Initial Assembly A S S E M B L Y / D I S a S S E M B L YDisassembly Seat InstallationTo install the seat AssemblyToggle Latch Closed O M F O R T a D J U S T M E N T S Comfort AdjustmentsSeat Height Adjustment Quick Release FastenersController Position To adjust the foot platform depthFoot Platform Depth To change the controller positionB a T T E R I E S a N D C H a R G I N G Batteries and ChargingCharging the Batteries Battery Break-in Frequently Asked Questions FAQsHow can I get maximum range or distance per charge? Why do my new batteries seem weak?How can I ensure maximum battery life? What type of batteries should I use?How should I store my Go-Chair and its batteries? What about public transportation?What about shipping? Joystick I . O P E R a T I O NVSI Controller KeypadSpeed Keys Battery Condition MeterOn/Off Key Horn KeyLocking/Unlocking the VSI Controller ConnectorSleep Mode Off-board Charger SocketVSI Error Codes Thermal RollbackI I . C a R E a N D M a I N T E N a N C E Care and MaintenanceTemperature Should your Go-Chair come in contact with waterWeekly Checks Cleaning InstructionsDaily Checks Monthly ChecksTo replace the wheel Wheel ReplacementBattery Replacement To replace the batteriesWhen to See An Authorized Pride Provider for Service Corrective MaintenanceW a R R a N T Y Service Checks and Warranty Service Implied WarrantiesT E S Quality Control Go-Chair Pride keeps a more detailed report on file at the factory
Related manuals
Manual 50 pages 49.48 Kb
Top Page Image Contents