Pride Mobility 1103 owner manual Monthly Checks, Yearly Checks, Storage, Cleaning Instructions

Page 25

VI. CARE AND MAINTENANCE

MONTHLY CHECKS

λCheck that the anti-tip wheels are not rubbing the ground when you are operating the Jazzy.Adjust them as necessary. See IV, “Comfort Adjustments.”

λCheck for extreme wear on the front anti-tip wheels. Replace them as necessary.

λCheck for drive tyre wear. See an authorized Pride provider for repair.

λCheck the rear casters for wear. Replace as necessary.

λCheck the rear forks for damage or fluttering which indicates that they may need to be adjusted or the bearings may need to be replaced. See an authorized Pride provider for repair.

λKeep your Jazzy clean and free of foreign material, such as hair, food, drink, etc.

YEARLY CHECKS

Take your Jazzy to an authorized Pride provider for yearly maintenance. This will help ensure that your Jazzy is functioning properly and help prevent future complications.

STORAGE

Your wheelchair should be stored in a dry place free from temperature extremes. When storing, disconnect the batteries from the Jazzy. See III, “Operation” for complete instructions. If you fail to store the unit under the above conditions, the frame can rust and the electronics can be damaged.

CLEANING INSTRUCTIONS

λNever hose off your Jazzy 1103 or place it in direct contact with water.

λYour Jazzy 1103 has a clear-coated ABS plastic body shroud that allows it to be easily wiped clean with a damp cloth. Never use any chemicals to clean a vinyl seat, as they may cause the seat to become slippery or dry out and crack. Use soapy water and dry the seat thoroughly.

TYRES AND TUBES

If your Jazzy 1103 is equipped with pneumatic tyres, you should check the air pressure at least once a week. This prolongs the life of your tyres as well as helps ensure the perfect operation of your chair. If you have a flat tyre, replace the tube. Replacement tyres and tubes are readily available at the Pride provider location where you purchased your Jazzy 1103.

WARNING: Completely deflate the tyre before attempting repair!

Follow these easy steps for a quick and safe tube or tyre replacement:

1.Completely deflate the tyre (if pneumatic).

2.Use a 9/16-in. wrench to remove the nut from wheel axle.

3.Pull the wheel off of the axle.

4.Use a 1/2-in. socket and ratchet to remove the four bolts that hold the two-piece wheel together. The rim separates into two pieces.

5.Remove the old tube and/or tyre and replace with new tube or tyre.

6.Place the rim halves together and reinstall bolts.

7.Slide the wheel back onto the shaft and torque the nut to 16 ft.-lbs.

8.Inflate the tyre to 30-35 psi (if pneumatic).

Jazzy 1103

25

Image 25
Contents Page F E T Y G U I D E L I N E S N T E N T S N T R O D U C T I O N My Authorized Pride Provider is II. Safety Inclines and Uneven Terrain Public Roads and Parking Lots Steps and KerbsMaximum Recommended Incline Jazzy 1103 Components III. OperationSpecifications Jazzy 1103 Power Base shroud removed Freewheel Levers Electronics Connector HousingTo engage or disengage the drive motors To charge the batteries using the off-board charger Batteries and Battery ChargingBatteries Frequently Asked Questions Faqs Battery BREAK-INWhy do my new batteries seem weak? What type of battery should I use?How can I insure maximum battery life? How should I store my Jazzy 1103 and batteries?To operate your Jazzy Jazzy OPERATION/CONTROLLERJoystick Controller Pilot ControllerBattery Condition Meter Speed and Response AdjustmentsJoystick Functions Trouble CodesThermal Rollback Flashing Diagnosis Solution BarsArmrest Width Adjustment IV. Comfort AdjustmentsSeat Height To change the seat heightJoystick Extension Adjustment Armrest Angle AdjustmentJoystick Position Footrest Angle Footrest HeightFootrest Depth To adjust the anti-tip wheel height ANTI-TIP Wheel AdjustmentBattery Removal DisassemblySeat Removal Body Shroud RemovalTemperature VI. Care and MaintenanceShould your Jazzy 1103 come in contact with water General GuidelinesWeekly Checks Daily ChecksTo check the brakes Monthly Checks Cleaning InstructionsYearly Checks StorageTo replace the battery Battery ReplacementMotor Brushes To inspect or replace the motor brushesWhen to see Your Pride Provider for Service Corrective MaintenancePower Elevating Seat Option VII. Optional AccessoriesPositioning Belt Power Seat ConnectorCane and Crutch Holder Oxygen Tank HolderWalker Holder Rear BasketSWING-AWAY Joystick Bracket Armrest Height AdjustmentElevating LEG Rests SWING-AWAY LEG RestsVIII. Warranty Damage caused by Warranty Exclusions
Related manuals
Manual 47 pages 27.45 Kb

1103 specifications

Pride Mobility 1103, a flagship mobility scooter model, epitomizes comfort, performance, and reliability for individuals seeking independence in their daily lives. This scooter is designed with advanced technologies and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the key features of the Pride Mobility 1103 is its robust power system. Equipped with a high-performance battery, this scooter boasts a competitive driving range, allowing users to navigate their surroundings without frequent recharges. The powerful dual motors ensure agility and responsiveness, making it easy to handle different terrains, including sidewalks and slight inclines.

The design of the Pride Mobility 1103 emphasizes user comfort. It features an adjustable seat with enhanced cushioning and armrests, providing a pleasant riding experience for extended periods. The flip-back arms further improve accessibility, making it convenient for users to get in and out of the scooter. The swivel seat adds an additional layer of ease, allowing users to face any direction effortlessly.

Safety is another cornerstone of the Pride Mobility 1103. This scooter includes a comprehensive lighting system, with bright front headlights and rear reflectors, ensuring visibility during low-light conditions. Equipped with a safety belt and anti-tip wheels, it promotes stability and confidence when navigating various environments.

In terms of control and navigation, the Pride Mobility 1103 features an intuitive tiller that can be adjusted for optimal positioning. The control panel is designed for ease of use with clear indicators for battery life, speed, and direction. This simplicity allows users to enjoy a seamless driving experience without unnecessary complications.

Durability is paramount in the construction of the Pride Mobility 1103. Built with high-quality materials, it is designed to withstand regular use while maintaining its sleek appearance. The scooter’s sleek, modern design is not only aesthetically pleasing but also functional, with ample storage options available for personal items.

In conclusion, the Pride Mobility 1103 stands out as a versatile mobility scooter that combines powerful performance, comfort, and safety features. This model caters to the diverse needs of users, allowing them to regain their mobility and independence, enhancing their quality of life in the process. Whether used for daily errands or leisurely outings, the Pride Mobility 1103 is engineered to deliver an exceptional driving experience.