Harbor Freight Tools 93033 operating instructions Additional Safety Warnings and Precautions

ATV Motorcycle Jack periodically, and if damaged, have it repaired by an authorized technician. The handle and pedals must be kept clean, dry, and free from oil and grease at all times.

10.Stay alert. Watch what you are doing, use common sense. Do not operate the ATV Motorcycle Jack when you are tired.

11.Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use this product if the Lifting Frame (2) doesn’t work properly.

12.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool.

13.Do not operate ATV Motorcycle Jack if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the ATV Motorcycle Jack

14.Maintenance. For your safety, maintenance should be performed regularly by a qualified technician.

Additional Safety Warnings and Precautions

1.Only operate this product on a flat, dry, level surface, capable of supporting the weight of this product and the load.

2.Do not attempt to lift equipment greater than the 1500 Lbs. maximum capacity.

3.Always use good quality hydraulic oil in the Jack. Do not mix various oils, and when filling the Jack, make sure no dirt or debris enters the hydraulic system.

4.Once a load is elevated, do not move the ATV Motorcycle Jack. The wheels on this product are designed to move the ATV Motorcycle Jack without a load.

5.Always engage the Stop Bars (33 and 35) when lifting a vehicle. See FIGURE 2 on page 5.

6.Lower the load slowly, in a controlled fashion. Never allow the load to drop quickly.

7.Never allow anyone to ride on this product when it is being raised, lowered, or while holding a load.

8.Keep fingers and hands away from the Lift Arms (4 and 6) when raising or lowering. Keep onlookers and children a safe distance during operation.

9.Use tie-down straps (not included) to secure the load.

10.This is a temporary lifting device only. It is not designed to support loads for extended periods of time.

11.Before each use, check for hydraulic oil leaks; never operate the Lift if leaks are present.