Specifications
SKU | 96513 | 96514 |
Construction | 14 Gauge Stamped Steel Frame, Cast Alloy Hinges, | |
| Carbon Steel Hardware | |
Finish | Galvanized Sheet Steel, Zinc Plated Hinges & Hardware | |
Maximum Weight Capacity | 1000 lb. Per Pair, 500 lb. Per Single Ramp | |
Ramp Tread Dimensions | 66” L X 8” W Perforated Steel | 66” L X 9” W Perforated Steel |
Ramp Overall Dimensions | 6’ x 9” | 6’ x 11” |
Net Weight | 30.5 lb. (Each Ramp) | 33.1 lb. (Each Ramp) |
Safety Chains | 1 Per Ramp | |
NOTE: Maximum Load Capacity = 1,000 lb. per pair, 500 lb. per individual ramp. Do not exceed this maximum capacity.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly in- structions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.Avoid working alone. If an accident happens, an assistant can bring help.
2.Keep work area clean. Cluttered areas invite injuries.
3.Observe work area conditions. Keep work area well lighted.
4.Keep children away. Children and pets must never be allowed in the area when you are loading or unloading a vehicle with the
5.Store idle equipment. When not in use, the Ramp must be stored in a dry location to inhibit rust. Always lock up Ramp and keep out of reach of children.
6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically
7.Use eye protection. Always wear
8.Do not overreach. Keep proper footing and balance at all times.
9.Maintain Ramps with care. Inspect Ramps periodically, and if damaged, have them repaired by an authorized technician.
SKU 96513/14 For technical questions, please call