Invacare Xterra GT manual Urethane Deep Profile Pair

Front 8" and Rear 6" Caster Assembly

NOTE: Front and rear caster assemblies use the same caster fork mounting hardware.

Item				Quantity Per
Number	Note	Part Number	Description	Package	Assembly
1		1101737	Cap	1	1
2		1028550	Locknut (5/8-18)	1	1
3		1041444	Washer (5/8 x 1-5/16 x 1/8")	1	1
4	A	1106166	Hardware, Caster Fork Mounting	1	1
5		1105838	Fork, Front Caster - Right	1	1
5		1105839	Fork, Front Caster - Left	1	1
5		1105840	Fork, Rear Caster - Right	1	1
5		1105841	Fork, Rear Caster - Left	1	1
6		1105852	Pin, Cotter	1	1
7		1115246	Screw, Phillips Flat Head Countersunk (M6 x 1 x	1	2
			45mm)
8		1108005	Spacer, Steel (5/8 x 7/8 x 1/8")	1	1
9		1025724	Washer (15/32 x 5/8 x 3/64")	1	1
10		1107168	Nut, Hex Slotted (7/16-20)	1	1
11		1107698	Locknut (M6 x 1)	1	2
12	B	1108561	Hardware, Caster	1	1
13		40117X006	Bearing (5/8")	1	1
14		1006049	Bearing (7/16")	1	1
15		1105854	Hub Cap	1	1
16	C,F	1108003-NLA	Rim (Outer/Inner) with Hardware	1	1
17		1108009	Wheel with Bearings	1	1
			Semi-Pneumatic
			8" x 2-1/4" Front
17	D	1108011-NLA	Wheel with Bearings	1	1
			Semi-Pneumatic
			6" x 2" Rear
17	E	1110715	Wheel with Bearings,	1	1
			6" x 2" Urethane Deep Profile
17	E	1122067	Wheel with Bearings,	2	1
NOTE: A	- Includes	Items 1-3.	6" x 2" Urethane Deep Profile (Pair)

B - Includes items 6-11.

C- Includes items 7 and 11.

DFor chairs made before 7/14/03, order (pair) part number 1122067 dated after 7/13/03 so each side matches. The deep profile caster design has two tread grooves with rounded corners instead of four tread grooves with square corners.

E- For chairs made after 7/13/03. The pair part number is also used for converting casters on chairs made before 7/14/03.

F- Rim is no longer available, see item 17.

Form No. 01-058

76

To order call toll free 1-800-333-6900, or www.invacare.com