GB (TrueTrack) Heavy Duty Motors and Hardware
For Both MKIV Elec.'s Before 5/22/07 & MK6i After 5/21/07
NOTE: GB motors were not available with the Arrow
the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP
NOTE: AConnector- Part #'skit)1153335/6. The brakeandreleaserefurbishedmechanism#'s are wasKits revisedincluding10/29/07a GB HDeliminatingMotor, Brakethe torsionLever Hardwarespring, addingand (Controllera bellville washerGasket and A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector was introduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also.
B - Part #'s 1153648/9 and refurbished #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Gasket Connector kit) and
B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped with Wheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm
C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly. Refer to the Suspension Arm Kits chart
D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly. Refer to the Suspension Arm Kits chart
NOTE: GB motors were not available with the Arrow
Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP
Form No.
167
To order call toll free