Invacare Tracer SX5 Removing the Flip Back Arms Removing the Back Canes Figure

REMOVING THE FLIP BACK ARMS

Refer to USING OR REPLACING FLIP-BACK ARMREST in the Owner’s Manual, part number 1110550.

REMOVING THE BACK CANES (FIGURE 1)

1.Remove the locknut from the bottom of each back cane.

2.Unthread the hex screw from the bottom of each back cane.

3.Remove the back canes with the upholstery from the wheelchair frame.

OUTSIDE OF

WHEELCHAIR

Locknut

Wheelchair Frame

Back Cane

Rear Upright

Hex Screw

INSIDE OF

WHEELCHAIR

FIGURE 1 - REMOVING THE BACK CANES

REMOVING THE WHEEL LOCKS (FIGURE 2)

1.Ensure the wheel lock is in the open (unlocked) position.

2.Remove the bolt and locknut that secure the wheel lock assembly to the wheelchair frame.

3.Repeat STEPS 1-2 for the opposite wheel lock.

Bolt and

Locknut

Wheel Lock

FIGURE 2 - REMOVING THE WHEEL LOCKS

Part No. 1110194 Rev A 3 Tracer® SX5 Recliner Conversion Kit