Invacare TRACER EX manual Repositioning The Upper Attachment Figure, Outer Tube Phillips Screw

Page 30

PROCEDURE 9

OPTIONS

O P T I O N S

Repositioning The Upper Attachment (FIGURE 3)

1.With the Telescoping I.V. rod in the lowest position, align the hole of the outer tube with the phillips screw of the inner tube. Remove phillips screw and set aside.

2.Remove the inner tube from the outer tube.

NOTE: Take note of the position and orientation of the height adjustment assembly before removing. The height adjustment assembly must be positioned to face away from the wheelchair when installed.

3.Firmly grasp the height adjustment assembly and Pull to remove from the outer tube.

4.Slide the upper attachment UP off of the outer tube.

5.Rotate the upper attatchment 180° and reinstall onto the outer tube.

6.Reverse STEPS 1-4 to reassemble the telescoping I.V. rod.

Inner Tube

Upper Attachment

Height Adjustment(Shown rotated 180°)

Assembly

Hole	Outer Tube

Outer Tube

Phillips Screw

FIGURE 3- REPOSITIONING THE UPPER

MOUNTING BRACKET

Image 30

Contents Tracer EX Damage MAY Result Table of Contents Special Notes Special NotesSafety Summary Safety SummaryTire Pressure Stability and Balance SAFETY/HANDLING of WheelchairsPercentage of Weight Distribution Coping with Everyday ObstaclesREACHING, Leaning Bending Forward Functional Reach from a WheelchairREACHING, Leaning Backwards Without Step Tubes TippingTipping Curbs Method 1 Wheelchair Tipping Curbs Method 1 Wheelchair With Step TubesStairways Transferring to and from Other SeatsFolding and Unfolding the Wheelchair OpeningClosing Specifications SpecificationsSafety Inspection Checklist Safety Inspection Check ListMaintenance Safety Precautions TroubleshootingMaintenance Suggested Maintenance ProceduresSwingaway Footrest Height Adjustment Figure Heel Loop Replacement FigureSwingaway Footrest Assembly Installation Figure Front RiggingsElevating Legrest Assembly Installation Figure Adjusting the Elevating Legrest Assembly FigureProcedure Front Riggings Armrest Figure Adjusting Armrest Height Adjustable Height Arms only FigureUsing or Replacing FLIP-BACK Removing or Replacing Standard Armrest FigureReplacing the Seat Upholstery Figure Adjusting Seat WidthProcedure Replacing the Back Upholstery FigureSeat and Back Removing Upper Mounting HardwareReplacing Rear Wheel Handrim Figure REMOVING/INSTALLING the Rear Wheels FigureREPLACING/REPAIRING Rear Wheel TIRE/TUBE Rear Wheel Hex Screw Axle Mounting Hole Axle SpacerReplacing Front Casters Figure Adjusting Forks FigureREPLACING/REPAIRING Front Caster TIRE/TUBE Front CastersChanging SEAT-TO-FLOOR HEIGHT- Tracer EX only Figure Top Middle BottomAdjusting The Anti-tippers Figure INSTALLING/ADJUSTING the ANTI-TIPPERSInstalling the Anti-tippers Figures 1 ANTI-TIPPERS/WHEEL LocksWheel Lock Adjustment Figure Bolt and Locknut Wheel Lock Handle Shoe Rear 5/16-inchesInstalling the Carrying Pocket Figure Installing Fixed Height I.V. ROD FigureInstalling the Amputee Attachment Figure OptionsProcedure Options Installing the Seat Positioning Strap FigureINSTALLING/ADJUSTING the Front ANTI-TIPPERS Figure Installing Front Anti-TippersAdjusting Front Anti-tippers Triangular Assembly Wheel InchUpper Rod Attachment Back Cane Installing the Telescoping I.V. RODKnob UpholsteryOptions Procedure Step tube shownSpacer LocknutUpper Step Tube Repositioning The Upper Attachment Figure Outer Tube Phillips ScrewLimited Warranty WarrantyInvacare Corporation