Telescoping I.V. ROD KIT

Assembly, Installation and Operating Instructions

Kit No. 1110154

SAVE THESE INSTRUCTIONS

NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact Carrier/ Dealer for further instruction.

SAFETY SUMMARY

To ensure the safe installation and adjustment of the Telescoping I.V. Rod Kit, these instructions MUST be followed:

GENERAL WARNINGS

DO NOT install or use this equipment without first reading and understand- ing this instruction sheet. If you are unable to understand the Warnings, Cautions or Instructions, contact a healthcare professional, dealer or techni- cal personnel before attempting to install this equipment – otherwise, injury or damage may occur.

DO NOT pull/push the wheelchair by the I.V. rod assembly. Injury to the assistant/occupant and/or damage to the I.V. rod assembly may occur.

DO NOT place any objects on the I.V. rod assembly other than those deter- mined by a healthcare professional.

INSTALLATION WARNING

After any adjustments, repair or service and BEFORE use, make sure all attaching hardware is securely tightened – otherwise injury or damage may result.

This kit contains the following items:

DESCRIPTION	QUANTITY

Telescoping Tube	1
Short Hex Screw	1
Small Locknut	1
Long Hex Screw	1
Large Locknut	1
Adjustment Knob	1
Support Bracket	1
Washer	1

NOTE: The I.V. Rod can be installed to either the right or left side of the wheelchair. The right side installation is shown in all figures. The left side installs in a similar manner.