Invacare IH6065 series Replacing the Footrest Cushion, Replacing the Back Cushion Model IH6077A

Page 22

SECTION 5—MAINTENANCE

Model IH6077A

NOTE: For this procedure, refer to FIGURE 5.2.

Removing

1.Remove the pan head mounting screw that secures the recline cable to the existing back cushion.

2.Remove the four long hex head screws that secure the back cushion to the back frame.

3.Remove the four short hex head screws from each of the two headrest brackets.

NOTE: Reinstall the pan head mounting screw on the new back cushion assembly in approximately the same location as on the old back assembly.

Installing

1.Align new back cushion with seat and frame.

2.Install four long hex screws to secure the back cushion to the back frame as shown in FIGURE 2. Securely tighten.

3.Secure the headrest bracket to the back cushion with four short hex screws. Securely tighten.

Back

CushionHeadrest Push

Bracket Handle

Back

Frame

Long Hex

Screws

Pan Head

Mounting Screw

Short Hex

Screws Long Hex

Screws

FIGURE 5.2 Replacing the Back Cushion - Model IH6077A

Replacing the Footrest Cushion

WARNING

DO NOT stand on the footrest or seat when entering or exiting the recliner. The recliner will tip and bodily injury may occur.

NOTE: For this procedure, refer to FIGURE 5.3 on page 23.

Invacare Mobile Recliners

22

Part No. 1141494

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Invacare Mobile Recliners Accessories Warning Table of Contents Maintenance Register Your ProductLabel Location Models IH6074A, IH6065 series, and IH6077ASpecial Notes MeaningDimensions Typical Product ParametersGeneral Guidelines Service InformationOperation Information Weight Limitation Recline Option Operated by an AttendantInspect/Adjust Initially Safety InspectionSafety Inspection Checklists Inspect/Adjust WeeklyInspect/Adjust Monthly Inspect/Adjust PeriodicallyAssembling the Recliner AssemblyAssembling Models IH6074A and IH6065 series Assembling Model IH6077A Repeat Steps 14 ‐ 16 for the other side panel Models IH6074A and IH6065 series OperationReclining the Chair User ReclineModel IH6077A Assisted ReclinePositioning Articulating Headrest Assisted Recline to Trendelenburg/Shock positionLocking/Unlocking the Rear Wheels Installing/Storing the TrayModel IH6074A Tray has a weight limitation of 40 lbs .2 kg Model IH6065ATo Set the Tray to a Locked Position Adjusting the Tray PositionTo Set the Tray to Freeflow Replacing the Back Cushion MaintenanceInstalling Model IH6074A and IH6065 seriesReplacing the Footrest Cushion Replacing the Back Cushion Model IH6077AReplacing the Recline Mechanism Guard Replacing the Footrest CushionReplacing the Elbow Pads Model IH6077A Only Replacing the Recline Mechanism GuardMounting Screw Cable Back Frame Installing Position Lock Lever Removing Position Lock LeverReplacing Casters Replacing Caster AssemblyReplacing Caster Wheels Installing Side Panel Removing/Installing the Side Panel Removing Side PanelsReplacing Plunger Release Knob Replacing the Armrest Cushion Cleaning the UpholsteryInstalling Armrest Cushion Removing Armrest CushionMaintenance Maintenance Limited Warranty USA

IH6065 series specifications

The Invacare IH6065 series is a line of advanced homecare beds designed to enhance the comfort, safety, and independence of individuals requiring long-term care. These beds are particularly beneficial for patients with mobility issues, offering a blend of innovative technologies and user-friendly features that cater to the diverse needs of both patients and caregivers.

One of the standout features of the Invacare IH6065 series is its adjustable height functionality. The bed frame can be easily lowered to a minimum height, facilitating safer transfers from and to the bed for individuals with limited mobility. This lowers the risk of falls and enhances the overall safety for both the patient and the caregiver. Additionally, the ability to elevate the bed allows caregivers to work at a comfortable height, reducing strain and promoting ergonomic positioning.

The IH6065 series also includes advanced positioning options, allowing users to adjust the head and foot sections of the bed. This feature not only aids in patient comfort but also helps alleviate pressure points, promoting better circulation and reducing the risk of pressure ulcers. The adjustable positioning can also assist in various therapeutic needs, such as elevation for respiratory issues or lowering for easier access.

Another important characteristic of the Invacare IH6065 series is its robust construction. The frame is designed to accommodate a wide range of weights, ensuring durability and stability during use. The bed comes equipped with either a mesh or wooden platform, providing patients with a firm yet comfortable sleeping surface. Furthermore, the quiet motor operation is designed to ensure minimal disturbance, allowing for a restful environment.

The bed's control system is intuitive, equipped with a user-friendly handheld remote that allows patients or caregivers to adjust positions effortlessly. This remote can also be equipped with features such as a lock-out option for added safety and to prevent unauthorized access to bed adjustments.

In terms of aesthetics, the Invacare IH6065 series offers a sleek design that seamlessly fits into home environments, promoting a sense of normalcy for users. The series also includes optional accessories, such as side rails and mattress options, enabling a customizable experience to meet individual needs.

Overall, the Invacare IH6065 series exemplifies innovation and quality in homecare solutions, combining comfort, safety, and advanced technology. It stands as a valuable option for individuals seeking a reliable and functional bed that enhances their quality of life.
Top Page Image Contents