Invacare IH6065 series manual Mounting Screw Cable Back Frame

Page 25

SECTION 5—MAINTENANCE

8. Turn cylinder 1/2‐turn in the opposite direction of STEP 7.

9. Reassemble by reversing STEPS 1‐6.

Mounting

Screw

Cable

Back Frame

DETAIL “A” -

Gas Spring LOOSENING THE

ReclineLOCKNUT Cylinder

Cable

 

Mounting

 

 

 

 

Bolt

Locknut

 

Gas Spring

 

Recline

 

 

Back

 

Cylinder

 

 

Frame

 

 

 

 

Clevis Pin

Retaining

 

 

Ring

 

 

Clevis Pin

 

 

Locknut

DETAIL “B” -

TIGHTENING THE

CABLE

Cylinder

Cable

Bottom Bracket

 

FIGURE 5.6 Adjusting Gas Spring Recline Cylinder Assembly - Model IH6077A Only

Replacing the Release Handle and Cable Assembly - Model IH6077A Only

NOTE: For this procedure, refer to FIGURE 5.7 on page 26.

1.With one hand, squeeze release lever up toward mounting bracket and remove anchor end of cable assembly from slot in release lever (Detail ʺBʺ ).

CAUTION

When removing the cable from the mounting bracket, use care to pull straight out of "V" notch. DO NOT remove by bending the cable. Damage to the cable may occur.

2.Remove cable assembly from ʺVʺ notch of the mounting bracket (Detail ʺBʺ).

3.Remove the mounting screw that secures the cable to the back frame.

4.Remove the mounting screw which secures the release handle to the push handle (Detail ʺAʺ).

5.Secure new release handle to the push handle with the existing mounting screw. Securely tighten (Detail ʺAʺ).

Part No. 1141494

25

Invacare Mobile Recliners

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Invacare Mobile Recliners Accessories Warning Table of Contents Register Your Product MaintenanceModels IH6074A, IH6065 series, and IH6077A Label LocationMeaning Special NotesTypical Product Parameters DimensionsGeneral Guidelines Service InformationOperation Information Recline Option Operated by an Attendant Weight LimitationSafety Inspection Checklists Safety InspectionInspect/Adjust Initially Inspect/Adjust WeeklyInspect/Adjust Periodically Inspect/Adjust MonthlyAssembling the Recliner AssemblyAssembling Models IH6074A and IH6065 series Assembling Model IH6077A Repeat Steps 14 ‐ 16 for the other side panel Reclining the Chair OperationModels IH6074A and IH6065 series User ReclineAssisted Recline Model IH6077AAssisted Recline to Trendelenburg/Shock position Positioning Articulating HeadrestLocking/Unlocking the Rear Wheels Installing/Storing the TrayModel IH6074A Model IH6065A Tray has a weight limitation of 40 lbs .2 kgTo Set the Tray to a Locked Position Adjusting the Tray PositionTo Set the Tray to Freeflow Installing MaintenanceReplacing the Back Cushion Model IH6074A and IH6065 seriesReplacing the Back Cushion Model IH6077A Replacing the Footrest CushionReplacing the Footrest Cushion Replacing the Recline Mechanism GuardReplacing the Recline Mechanism Guard Replacing the Elbow Pads Model IH6077A OnlyMounting Screw Cable Back Frame Removing Position Lock Lever Installing Position Lock LeverReplacing Casters Replacing Caster AssemblyReplacing Caster Wheels Installing Side Panel Removing/Installing the Side Panel Removing Side PanelsReplacing Plunger Release Knob Installing Armrest Cushion Cleaning the UpholsteryReplacing the Armrest Cushion Removing Armrest CushionMaintenance Maintenance USA Limited Warranty

IH6065 series specifications

The Invacare IH6065 series is a line of advanced homecare beds designed to enhance the comfort, safety, and independence of individuals requiring long-term care. These beds are particularly beneficial for patients with mobility issues, offering a blend of innovative technologies and user-friendly features that cater to the diverse needs of both patients and caregivers.

One of the standout features of the Invacare IH6065 series is its adjustable height functionality. The bed frame can be easily lowered to a minimum height, facilitating safer transfers from and to the bed for individuals with limited mobility. This lowers the risk of falls and enhances the overall safety for both the patient and the caregiver. Additionally, the ability to elevate the bed allows caregivers to work at a comfortable height, reducing strain and promoting ergonomic positioning.

The IH6065 series also includes advanced positioning options, allowing users to adjust the head and foot sections of the bed. This feature not only aids in patient comfort but also helps alleviate pressure points, promoting better circulation and reducing the risk of pressure ulcers. The adjustable positioning can also assist in various therapeutic needs, such as elevation for respiratory issues or lowering for easier access.

Another important characteristic of the Invacare IH6065 series is its robust construction. The frame is designed to accommodate a wide range of weights, ensuring durability and stability during use. The bed comes equipped with either a mesh or wooden platform, providing patients with a firm yet comfortable sleeping surface. Furthermore, the quiet motor operation is designed to ensure minimal disturbance, allowing for a restful environment.

The bed's control system is intuitive, equipped with a user-friendly handheld remote that allows patients or caregivers to adjust positions effortlessly. This remote can also be equipped with features such as a lock-out option for added safety and to prevent unauthorized access to bed adjustments.

In terms of aesthetics, the Invacare IH6065 series offers a sleek design that seamlessly fits into home environments, promoting a sense of normalcy for users. The series also includes optional accessories, such as side rails and mattress options, enabling a customizable experience to meet individual needs.

Overall, the Invacare IH6065 series exemplifies innovation and quality in homecare solutions, combining comfort, safety, and advanced technology. It stands as a valuable option for individuals seeking a reliable and functional bed that enhances their quality of life.
Top Page Image Contents