6.Repeat STEPS 2‐5 for the other back cane, ensuring that the back height selected in STEP 5 is the same for both back canes.
7.Secure the back upholstery to the new back canes with the existing mounting screws and washers (Detail “A”).
DETAIL “A” | DETAIL “B” | |
Washer | Back Canes | Wheelchair |
| Frame | |
|
| |
|
| 19 inches High |
|
| 18 inches High |
|
| 17 inches High |
Mounting Screws |
| 16 inches High |
|
| |
|
| 15 inches High |
Back Upholstery | Washer |
|
DETAIL “C”
Back Cane
Wheelchairs
manufactured
before 11/01/05)
Wheelchair
Frame
Locknuts
Mounting
Screws
Back Cane
Wheelchair
Frame
Spacers
Mounting
Screws
Wheelchairs
manufactured after 11/01/05
NOTE: The spacers
must be on the
Locknuts outside of the wheelchair in order for the mounting screws to be properly tightened.
FIGURE 1
Replacing Back Canes
Invacare Corporation | www.invacare.com |
|
|
|
|
USA | Canada |
|
One Invacare Way | 570 Matheson Blvd. E Unit 8 Invacare, the Medallion Design, and | |
Elyria, Ohio USA | Mississauga Ontario | Yes, you can. are registered |
L4Z 4G4 Canada | trademarks of Invacare Corporation. | |
©2005 Invacare Corporation | ||
|
| |
Part No 1046525
MADE IN MEXICO
Rev C - 12/6/05