Unpacking the Lift

HOLD

DOWN

ARM

CARRIER

ASSEMBLY

CLASS 1

STABILIZER

OPTIONAL	OPTIONAL
CLASS 2	CLASS 3
OR	OR

Each Tilt and Tote is packaged with a Class 1 Hitch Adapter and Stabilizer.

If a Class 2 or Class 3 hitch adapter is required, separate parts must be ordered.

Be sure and check the contents of the box against the package check list to be sure that all parts are included with the carrier that are required for proper installation. If any parts are missing or if any damage is noted, immediately contact the distributor from which you purchased your lift. DO NOT attempt to install or use the lift with any missing or damaged parts.