LIBERTY™ 624 MINI CARE AND MAINTENANCE
Your LIBERTY™ 624 MINI is designed to require a minimal amount of care and maintenance. As the owner of the LIBERTY™ 624 MINI you are responsible for the upkeep of your powerchair. If you have any doubt as to its care or operation, please return the powerchair to your dealer for inspection.
Eagle Parts and Products suggest the following care, maintenance, cleaning and storage ideas to ensure the very best performance out of your LIBERTY™ 624 MINI.
Daily Performance Review
1.Turn the controller power OFF position.
2.Check the joystick for any visible damage.
3.Guide the joystick to each corner of the controller and release. If it does not return to the center, do not use the chair.
4.Inspect the body for any structural damage.
5.Completely charge the batteries.
Weekly Checks
It is important that you test the electric brake on a weekly basis. To do this, follow these simple steps:
1.Place your LIBERTY™ 624 MINI on a flat surface with adequate room.
2.Turn the controller to the on position.
3.The battery gauge should illuminate within one second.
4.Push the joystick forward until the brakes release.
5.Release the joystick. The brakes should engage within a few seconds.
6.Repeat the above procedure in each direction, reverse, left and right.
7.Check all connectors to ensure proper connections and inspect for any visible damage.
8.Examine all cables for possible damage.
9.Inspect the rubber gaiter around the joystick base for damage.
10.Make sure all electronic components are securely attached to your chair.
11.Inspect tires for proper inflation, if they are pneumatic. This helps reduce excessive wear.
NOTE: LIBERTY COMES STANDARD WITH SOLID TIRES.
Monthly Checks
In addition to the above, also inspect all hardware to ensure it is secure. Perform all operational tests and calibrations.
21