1.10 CLEANING AND MAINTENANCE ROUTINES FOR USERS
The Remploy Avanti is attractively finished, using high quality materials.
It will retain its appearance during use if looked after and cleaned by the carer, or other responsible member of the family.
Best results will be obtained if the paintwork is protected, using a car wax polish. Upholstery should be wiped with a damp cloth.
Marks can be removed using a mild detergent.
The Avanti is designed for the minimum, amount of service maintenance. However, we recommend that users inspect the chair regularly and look particularly at the following:
Locking Catches:
Check that the backrest lock pins operate smoothly when the cable is pulled, and latch easily into position to retain the backrest.
Brake:
Check that the parking brake is operating correctly.
Pivots:
Occasional light lubrication of the pivots will improve opening and closing.
Upholstery cleaning
The fabric used for wheelchair upholstery is easily cleaned
Resistance to stains and chemicals
The upholstery is resistant to most mild acids, alkalis and household stains. Some substances such as ballpoint pen ink, lipstick, newsprint and food colourings may be absorbed by the vinyl and cause permanent staining. This can often be minimised by immediate cleaning with a damp, soapy cloth or sponge
To maintain its appearance, the fabric should be cleaned REGULARLY to remove fatty substances in soiling, which may reduce its service life. Light soiling can be removed by adding a small amount of washing up liquid to some warm water and then applying to the fabric with a cloth. Rinse off with clean water before allowing to dry. If need be, a Mild solution of antiseptic can be applied to the fabric.
Do not use
Chemical bleaching materials, abrasive cleaners, wax polishes or aerosol spray polishes on the upholstery. The use of these substances is likely to be harmful to PVC laminates and repeated use can result in the removal of plasticiser from the PVC compound which will result in hardening and subsequent cracking of the material’s surface.
Page 11 | March 2005 Revision B |