Avanti AVANTI CHAIR manual Pin located in locked position in hinge bracket

Page 5

The Avanti can be opened by the following sequence of operations.

•Remove chair from packing using seat handle.

•Lift push handle.

•Lock backrest and push handle into position by pulling cable up and locating pins in hinge bracket. Take care when locking into position.

•Ensure that quarter turn latch pin locates in to the tube.

Pin located in locked position in hinge bracket.

• Apply Brake.

• Place footrest in forward position.

• Place one armrest into bottom position.

•User access chair via side.

•Place remaining armrest into bottom position.

•Engage lap strap.

Quarter Turn Latch.

The chair can be opened easily with practice. Do not put fingers inside the structure when it is being opened and locked out.

OCCUPANT TO BE SUPERVISED AT ALL TIMES

ENSURE THAT BACKREST LOCK IS FULLY ENGAGED BEFORE USING

Page 5

March 2005 Revision B

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Remploy Healthcare Avanti User Guide & Information Avanti Chair User Guide Index Avanti User Guide & InformationMarch 2005 Revision B Preparing the Chair for USE Introduction & Opening the Product PackagePin located in locked position in hinge bracket Do not Attempt Side Transfer on Slippery or Uneven Floors Side Access and Occupant TransferBrakes Wheels Manoeuvrability & SafetyOccupant should not be Left Unnattended Going down a kerbGoing down/up a flight of steps Going up a kerb. First MethodGoing up a kerb Second Method March 2005 Revision B Cleaning and Maintenance Routines for Users Warranty User Safety Reference ChecklistDistributor Service Check List Service by Authorised DistributorAvanti Wheelchair Measured Data And Advised Information Positive Momentum
Top Page Image Contents