ASSEMBLY INSTRUCTIONS | Fig. 1 |
Before Assembly
Handle
NOTE: Carefully inspect all cartons for shipping damage before unpacking. If damage is found, contact your shipper or Tanita Corporation immediately. Claims must be filed with the shipper as soon as possible after receipt of the damaged package.
One carton containing: Folding platform
One parts box containing: AC adaptor, four (4) threaded feet, two (2) sheets of adhesive labels, and two (2) elastic cords.
Another small box containing: The electronic control panel box.
Tools Needed: None
Locking Screw &
Carriage Bolt
64012
Assembling the Portable Wheelchair Scale
1.Place the platform on the floor, in the open position.
2.Slide the locking screw over the black tabs on the handle. Tighten securely by hand. (Fig. 1)
3.Turn scale over and thread the four leveling feet into the threaded holes on the underside of the platform. Tighten by hand only. DO NOT use tools to tighten the feet or damage to the scale will result. (Fig. 2)
4.Plug the transducer cable (63826) into the matching jack on the control box. Hand tighten the threaded lock ring.
5.Plug the AC adapter into any grounded
NOTE: DO NOT
Leveling the Platform
To level or adjust the height of the scale platform, carefully tilt the scale and turn the leveling feet either into or out of the platform underside.
NOTE: Adjust platform height so it does not touch floor or carpet. An incorrect weight reading will result if the ramp touches the floor or carpet.
Fig. 2
www.tanita.com | WEIGHT | Pounds | Kilos |
|
|
and | Push | “ON |
|
steppappearwsaituntil”button | ZERO | ||
ingonsbefore zero | |||
| cale | POUNDS | |
|
|
| |
|
|
| KILOS |
|
| OFFON |
|
Attach Leveling Feet
63879
Fig. 3
WEIGHT |
| Pounds | Kilos |
|
|
| |
www.tanita.com |
|
|
|
Push | “ON” button |
|
|
and wait | ZERO | ||
appears | until zero |
|
|
stepping on sbceafleore | POUNDS |
| |
|
| KILOS |
|
| ON |
|
|
| OFF |
|
|
Rubber Mat
64013
2