Troubleshooting, Transporting and Storing | Tanita 4521 specification

TROUBLESHOOTING

The following guide will help you to solve common problems:

PROBLEM	SOLUTION

Incorrect patient	A. Platform is too low and hitting platform feet or
weight readings	carpet. Increase platform height. See “Leveling
	the Platform” on page 2.
	B. Person, other than person being weighed,
	is touching or leaning on scale handlebar
	C. Weight of wheelchair or chair is not taken into
	account. See “Operating Instructions” on page 4.
	D. Platform is not level. See “Leveling the Platform”
	on page 2.

Patient weight readings	Check scale calibration and calibrate if necessary.
consistently too high	See “Calibration” on page 5.
or too low

Display flashes “Lo-b”	Recharge battery. See “Charging the Battery” on
	page 3.

TRANSPORTING AND STORING

See Fig. 5 for visual assistance.

1.	Unplug the adapter	Fig. 5
	from the outlet, then
	unscrew it from the
	electronic control
	box and set the
	adapter aside.
2.	Slide the adjustable
	rail to its widest setting.
3.	Loosen the locking
	and slide it off the	.

steppaipanpngedPoawunrsasshibctea“uflOnoetNriel”zbeurotton

ZERO

POUNDS

KILOS

4.Slowly lift the scale by the handle. Avoid letting the rails bang together.

5.Wrap an elastic cord (64010) around each end of the rails and hook the cord ends together.

6.Unscrew the scale cable from the control box and firmly place the control panel box on the velcro tape of the center column. Wrap the cable around the center column above the control panel box and secure.

7.The scale is now ready for transportation or storage.

8.Remember to keep the adapter with the scale.

9.For additional convenience and protection of your portable wheelchair scale, a scale storage bag is available from your Tanita representative.