Recalling and Erasing Memory Data

Infrared Ear Thermometers iCcurate		User Manual

5.Gently and carefully place the thermometer probe tip snugly into the ear canal while tugging the ear.

6.Press and hold the ACTIVATION button. A short beep will be heard to confirm the end of easurement.

7.Remove the temperature from the ear, and get the temperature reading on the LCD.

8.Press the BACKLIGHT button and hold it for easy nighttime reading, if desired.

9.The device is ready to take a new temperature only when the “READY” symbol appears steady.

10.Replace with a new probe cover after each measurement.

11.The thermometer will automatically turn off if no button is pressed within 60 seconds.

The last temperature taken before the thermometer powers down is stored in memory. Up to 8

Temperature readings can be stored in memory. Up to 8 temperature readings can be stored into

The memory cells from M1 to M8. The latest reading is always at M1.

By pressing ON/M button, the cell number will be shown on the LCD.

After releasing the button, the stored temperature will be displayed with the memory mode Symbol M indicated.

Press and hold the ON/M button for at least 5 seconds to erase all the stored temperatures in Memory. “CLr” will be shown on the LCD. An empty memory cell shows “---℃” or “---℉”

Changing the Temperature Scale

1.Wait until the thermometer powers down or make sure the thermometer is at off state.

2.Press and hold the ACTIVATION button first, and then press and release the “ON/M” button.

3.Wait until the display scale changes from ℃ to ℉ or vice versa. All the memory data will be changed accordingly.

4.Release the ACTIVATION button.

Important Notes about Taking Temperature

1.It is necessary to inspect the soft lens for damage each time the probe cover is changed. Do not use the thermometer if the soft lens is damaged.

2.It is important to gently position the probe into the ear canal snugly and aim the thermometer probe at the eardrum to obtain an accurate reading.

3.The same person may have different temperatures in the right and left ears. It is recommended that all temperatures be taken in the same ear when monitoring an individual’s temperature.

4.Many people do not run a fever (a rise in body temperature above normal) even when they are ill. You must immediately consult a physician, regardless of temperature reading, if you feel an illness is present.

5.Under any of the following situations, you should take three consecutive measurements in the same ear and use the highest temperature of the three readings:

a.Newborn babies under ninety (90) days old.

b.Infants under three (3) years of age with immune disorders which are life-threatening at abnormal body temperatures.

c.You are unfamiliar with the temperature measuring process and notice a wide variance between consecutive readings.

6.When taking consecutive measurements, a variation of 0.2℃ - 0.3℃ (0.3℉ - 0.5℉) can occur for any type of thermometer.

7.If an individual has been sleeping on one ear for a while, the temperature of that ear will be higher than normal. You should measure the other ear or wait for a few minutes for the ear temperature to normalize before measuring.

8.Excessive earwax will adversely affect the thermometer’s accuracy. Making sure the ears are clean before taking a temperature measurement

i-Ccurate specifications

The Rosewill i-Curate is an elegant and efficient case designed for modern PC builders who value aesthetics as much as performance. This mid-tower chassis stands out not only for its appealing design but also for its robustness and versatility, making it an ideal choice for gamers and professionals alike.

One of the main features of the Rosewill i-Curate is its stunning tempered glass side panels. These panels offer a clear view into the interior, showcasing your components and any custom lighting you may choose to install. The glass is not just for aesthetics; it is also designed to reduce noise, making your setup quieter while still showcasing your build in all its glory.

The i-Curate is compatible with a variety of motherboard sizes, including ATX, Micro-ATX, and Mini-ITX. This versatility makes it accommodating for a range of builds, whether you are constructing a high-performance gaming rig or a compact workstation. The internal layout is designed to maximize airflow, featuring multiple fan mounting locations and support for various cooling solutions, including liquid cooling systems.

Cooling is a top priority in PC building, and the Rosewill i-Curate excels in this regard. The case supports up to six cooling fans, allowing for optimal airflow throughout the chassis. Its mesh front panel facilitates superior air intake, improving cooling efficiency and ensuring that your components run at optimal temperatures.

Additionally, the i-Curate includes ample space for storage, accommodating multiple hard drives and SSDs. This feature is ideal for users who require significant storage capacity for games, software, and files. The thoughtful cable management system ensures that your build looks clean and organized, reducing clutter and promoting better airflow within the case.

The case is designed with user accessibility in mind, featuring easy-to-use thumb screws for quick access to components. Whether you are upgrading your system or performing routine maintenance, the i-Curate makes the process straightforward and hassle-free.

In conclusion, the Rosewill i-Curate is a mid-tower case that combines style, functionality, and robust cooling solutions. With its striking design, ample compatibility with different motherboards, and thoughtful features, it is a solid choice for anyone looking to build a high-performance PC while making a statement with their hardware setup. Whether for gaming or professional use, the Rosewill i-Curate rises to the occasion, providing a reliable foundation for your computing needs.