Invacare ISP2000 Removing the Mask and Headgear Figure, Cleaning the Mask and Headgear

Page 6

HEADGEAR/MASK REMOVAL, CLEANING

REMOVING THE MASK AND HEADGEAR (FIGURE 2)

1.Place your thumb and forefinger around one of the headgear clips and gently pull the headgear clip away from your face.

NOTE: It is not necessary to remove the headgear straps from the clips or the forehead support when removing the mask.

2. Pull the mask forward and lift it up and over the head.

Headgear

Clip

Headgear

Clip

FIGURE 2 - REMOVING THE MASK AND HEADGEAR

CLEANING THE MASK AND HEADGEAR

CAUTION

ALWAYS be sure to remove any foreign material (dirt, lint, etc.) from the exhalation ports.

DO NOT use bleach,chlorine,aromatic-based cleaning solutions, scented oils, or moisturizing or antibacterial soaps, to clean the cushion, mask frame, headgear, or air tubing. These solutions may cause hardening and reduce the life of theproduct.

Alcohol may be used to clean the silicone nasal cushion ONLY. DO NOT use alcohol to clean the mask

frame, head gear or air tubing.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Invacare Twilight Nasal Mask and Headgear Model no ISP2000 StandardSpecial Notes Special NotesSafety Summary HEADGEAR/MASK ASSEMBLY, Placement and Usage Figure HEADGEAR/MASK ASSEMBLY, PlacementHEADGEAR/MASK ASSEMBLY, Placement Detail a Detail BDetail C Cleaning the Mask and Headgear HEADGEAR/MASK REMOVAL, CleaningRemoving the Mask and Headgear Figure Mask REMOVAL, Disassembly and Cleaning Reassembly DISASSEMBLING/REASSEMBLING Nasal Cushion to the Mask ShellSTORAGE, Specifications Pressure and Flow CharacteristicsReplacement ITEMS/ Accessories Storage and Operating ConditionsLimited Warranty WarrantyWarranty One Invacare Way
Top Page Image Contents