Invacare ISP2000 Reassembly, DISASSEMBLING/REASSEMBLING Nasal Cushion to the Mask Shell

Page 8

REASSEMBLY

Nasal Mask

Nasal Mask

Channel

Cushion Ribbing

Nasal Mask

Cushion

Nasal Mask

Channel

Cushion Ribbing

FIGURE 3 - DISASSEMBLING/REASSEMBLING THE

NASAL CUSHION TO THE MASK SHELL

NOTE: Ensure the nasal cushion is COMPLETELY seated in the channel before use. When properly assembled, the nasal cushion and mask shell should form a smooth, continuous surface.

5.After the nasal mask cushion is securely reassembled, rinse the entire mask thoroughly and allow to air dry out of direct sunlight.

NOTE: Make sure the mask is dry before use. Inspect the mask after cleaning.

CAUTION

Replace the mask if any parts are damaged or deteriorated.

8

Image 8

Contents Invacare Twilight Nasal Mask and Headgear Model no ISP2000 StandardSpecial Notes Special NotesSafety Summary HEADGEAR/MASK ASSEMBLY, Placement and Usage Figure HEADGEAR/MASK ASSEMBLY, PlacementDetail C HEADGEAR/MASK ASSEMBLY, Placement Detail aDetail B Removing the Mask and Headgear Figure Cleaning the Mask and HeadgearHEADGEAR/MASK REMOVAL, Cleaning Mask REMOVAL, Disassembly and Cleaning Reassembly DISASSEMBLING/REASSEMBLING Nasal Cushion to the Mask ShellPressure and Flow Characteristics Replacement ITEMS/ AccessoriesSTORAGE, Specifications Storage and Operating ConditionsLimited Warranty WarrantyWarranty One Invacare Way