Invacare XPO2 Invacare HomeFill Oxygen Filling System, Features, Oxygen output from concentrator

280274_05-054:05-054 1/21/08 12:36 PM Page 4

Invacare®

HomeFill®

Oxygen Filling

System

Invacare® HomeFill® Oxygen Filling System

Invacare® HomeFill® Oxygen Filling System

Model no. IOH200 (compressor), IOH270 (Ready-Rack), Perfecto2 (concentrator)

The Invacare HomeFill has revolutionized ambulatory oxygen by allowing patients to fill their own cylinders from their Invacare® 5-liter and 10-liter* concentrators. With HomeFill, providers reduce costs by virtually eliminating cylinder deliveries, while patients enjoy their freedom and independence with an unlimited supply of ambulatory oxygen. The HomeFill Oxygen Filling System allows the patient to breathe at home from a continuous flow concentrator and then use a convenient ambula- tory pack when they are “out and about.”

The available Patient Convenience Pack for the HomeFill uses the latest integrated pneumatic conserving technology while remaining lightweight. This cylinder combines all the patient independence and provider cost savings realized with the HomeFill delivery model plus carefree conven- ience and simplicity. The convenience pack (available in M2, ML4, ML6 and M9) requires no batteries, no cumbersome connection tubes, and uses a standard single lumen cannula. It allows the patient to quickly fill an ambulatory cylinder and go where they want, when they want. Now HomeFill cylinders are also available with CGA870 compatible post valves and integrated conservers. With a full line of cylinders, HomeFill now meets the needs of most oxygen patients.

*For patients with oxygen flow rates up to 5 liters per minute.

Features

• Small and lightweight

• Connections and controls are easy to use

• Patient has independence and freedom

• Patient breathes from continuous flow concentrator while filling cylinders

• Virtually eliminates the high service costs of frequent delivery of cylinders or liquid oxygen

Specifications - HomeFill Compressor

Electrical requirements	120 VAC ± 10% at 60 Hz
Power consumption	200 watts
Rated current input	2.0 amps
Inlet pressure rating	14 - 21 psi
Oxygen output (from concentrator)
5-liter concentrator	0	- 3 lpm (while filling cylinders)
10-liter concentrator	0	- 5 lpm (while filling cylinders)
Oxygen input	0	- 2 lpm
Dimensions
Width	20.25"
Height	15"
Depth	16"
Weight	33 lb.

4

HomeFill System with optional IOH270 Ready-Rack shown