Inova CTPT-3LPZ, CTPT-6LPZ manual Troubleshooting, Problem, Solution, Carry Bag Options

Page 11
Troubleshooting

Troubleshooting

The following troubleshooting chart will help you analyze and correct minor system malfunctions. If the suggested procedures do not help, call your medical equipment provider. Do not attempt any other maintenance.

WARNING To avoid electric shock hazard, do not disassemble the portable case. This should only be done by a qualified technician.

Problem

Solution

No indicator light(s)

Check that there are new (2 AA batteries).

 

Check that the cannula tubing is properly

 

connected and that the tube is not blocked.

 

Check that the CF (Continuous Flow/SmartDose)

 

switch is in the SmartDose position. Refer to the

 

“SmartDose Liquid Oxygen Portable Delivery

 

Modes” (pg. 10) section in this manual for

 

additional information.

Carry Bag Options

The illustrations below show the recommended configurations for the optional carry bag for the SmartDose Liquid Oxygen Portable. To order a carry bag, refer to the chart below.

OPTIONAL Carry Bag for SmartDose LOX

Carry Bag for Model CTPT-3LPZ

CTBG-3L99

Carry Bag for Model CTPT-6LPZ

CTBG-6L99

16

9

Image 11
Contents Model CTPT-3LPZ Model CTPT-6LPZ SmartDoseLiquid Oxygen Portables PRODUCT MANUALPage Important Information Physician Information ClassType B EquipmentHow SmartDose Works Important Safeguards Warranty Claim Procedures and RequirementsTerms, Abbreviations & Symbols Warnings Warranty InformationGeneral Dangers & Warnings Do not use if FCC StatementAppendix Warnings About HandlingCautions & Notes Transporting and Storing SmartDose Liquid Oxygen Portables Activation Button Carry Bag Options TroubleshootingProblem SolutionContinuous Flow mode CF switch pushed inCF switch pulled out SmartDose modeChanging the Batteries Starting Oxygen Delivery from the SmartDose Liquid Oxygen Portable