Panasonic SA-XR58 manual Safety precautions

Page 2

ENGLISH

 

Safety precautions

 

 

Placement

 

 

 

 

Set the unit up on an even surface away from direct sunlight, high

 

 

temperatures, high humidity, and excessive vibration. These conditions

precautions

 

can damage the cabinet and other components, thereby shortening the

 

Do not use high voltage power sources. This can overload the unit and

 

 

unit’s service life.

 

 

Do not place heavy items on the unit.

 

 

Voltage

Safety

 

cause a fire.

 

Do not use a DC power source. Check the source carefully when

 

 

 

 

setting the unit up on a ship or other place where DC is used.

 

 

AC mains lead protection

 

 

Ensure the AC mains lead is connected correctly and not damaged.

 

 

Poor connection and lead damage can cause fire or electric shock. Do

 

 

not pull, bend, or place heavy items on the lead.

 

 

Grasp the plug firmly when unplugging the lead. Pulling the AC mains

 

 

lead can cause electric shock.

 

 

Do not handle the plug with wet hands. This can cause electric shock.

 

 

Foreign matter

 

 

Do not let metal objects fall inside the unit. This can cause electric

 

 

shock or malfunction.

 

 

Do not let liquids get into the unit. This can cause electric shock or

 

 

malfunction. If this occurs, immediately disconnect the unit from the

 

 

power supply and contact your dealer.

 

 

Do not spray insecticides onto or into the unit. They contain flammable

 

 

gases which can ignite if sprayed into the unit.

 

 

Service

 

 

Do not attempt to repair this unit by yourself. If sound is interrupted,

 

 

indicators fail to light, smoke appears, or any other problem that is

 

 

not covered in these operating instructions occurs, disconnect the AC

 

 

mains lead and contact your dealer or an authorized service center.

 

 

Electric shock or damage to the unit can occur if the unit is repaired,

 

 

disassembled or reconstructed by unqualified persons.

 

 

Extend operating life by disconnecting the unit from the power source if

 

 

it is not to be used for a long time.

2

CAUTION!

•DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

•DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.

•DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.

•DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable.

CAUTION!

Do not place anything on top of this unit or block the heat radiation vents in any way. In particular, do not place DVD recorder or CD/ DVD players on this unit as heat radiated from it can damage your software.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of Digital Theater Systems, Inc.

Refer to the back cover for “Supplied accessories”.

RQTV0156

Page 1 Page 3
Image 2
Page 1 Page 3
Contents AV Control Receiver Safety precautions Table of contents Main unit and display Remote controlControl guide Connection cable Connecting your television and DVD equipmentHigh-quality audio and video simply with Hdmi connection For your referenceHome Theater connections Home Theater connections EnglishDigital Video Connection with 21-pin scart cableRear panel Audio OUT Coaxial OpticalDVD player DVD recorder Analogue audio connectionsFront Surround See also Playing DVD-AudioAudio OUT Optical Connecting a combination DVD recorder/VCRDigital Audio OUT Optical DVD/VHS Common OUTEquipment English Connecting other equipmentConnecting other Connecting the antennas and AC mains lead EquipmentSpeaker connections Connecting speakersNumber Placement Speaker connections EnglishSpeaker Connecting biwireable speakersConnecting a second pair of front speakers Before playback English Auto speaker setupBefore playback Before playback Start performing auto speaker setupAuto speaker setup finishes Turn on the unit PressBefore playback Troubleshooting for auto speaker setupMessage Solutions Pages Automatic speaker detection Speaker output and levelBasic play Enjoying Home Theater featuresFeatures English Signal indicators Theater featuresDigital signals this unit can play Enjoying HomePlayback options English UsingPlayback options To turn off Hdavi Control, Hdmi settings, Using Hdavi ControlTMUsing Hdavi ControlTM English One-touch Home TheaterSurround sound Adjusting the Dolby Pro LogicΙΙx Music modeSurround sound Dolby Pro LogicΙΙxPress NEO6 to select one of the following modes Adjusting the NEO6 Music modeSurround sound English Press Effect to select C-IMAGE, then pressPress Music to select one of the following modes Surround soundSFC Sound Field Control Press Movie to select one of the following modesAdjusting the effect level Press Then press To adjust the levelReceiver Receiver settingsSettings English Basic operationsAuto Setup Speaker and size SettingsLR BI-WIRE setting DistanceInput signal Receiver settingsDigital input settings Bi-amp settingsDelaying audio Hdmi settingsAMP off Clear audio at low Volume Resetting factory SettingsEnter the menu Sound effects/Other functionsSound Turn To select the itemSound effects Radio Manual tuningOn the remote control Direct tuning On the main unit Radio Preset tuningPresetting stations Selecting channelsTelevision RDS broadcastsChanging the display With other Using the remote control with other equipmentUsing the remote control DVD recorder/DVD playerUsing the remote control with other equipment CD playerWith UsingOther ControlMessage Causes and solutions Specifications DIN 45Specifications/Help messages English Help messagesHdmi Troubleshooting guideTroubleshooting guide English Web Site http//panasonic.net Supplied accessoriesMaintenance For business users in the European Union

SA-XR58 specifications

The Panasonic SA-XR58 is a sophisticated digital AV receiver that combines cutting-edge technology with high-quality sound performance, making it an exceptional choice for home theater enthusiasts. Launched as part of Panasonic’s renowned XR series, this receiver highlights innovative digital technology and careful engineering, achieving a captivating audio experience.

One of the standout features of the SA-XR58 is its Class D amplification. Unlike traditional Class A/B amplifiers that can be bulky and inefficient, the SA-XR58 utilizes a digital amplifier design that is lightweight and energy-efficient while delivering an impressive 100 watts per channel into 8 ohms. This allows users to enjoy rich, dynamic sound without the heat and power consumption associated with conventional amplifiers. The digital architecture also contributes to the clarity and precision in audio, ensuring a faithful reproduction of soundtracks and music.

The SA-XR58 supports a wide variety of audio formats, including Dolby Digital, DTS, and various PCM formats, enabling it to handle diverse content seamlessly. Additionally, with its integrated 7.1 channel surround sound capability, users can experience immersive audio that propels them right into the action of movies and games. The unit is equipped with multiple inputs, including HDMI, component video, and optical digital audio, providing flexibility for connecting numerous devices such as gaming consoles, Blu-ray players, and streaming boxes.

Another technological highlight of the SA-XR58 is its advanced audio processing capabilities. This receiver features a sophisticated equalizer that allows for fine-tuning of audio settings to match the acoustics of your room. This ensures optimal sound quality, regardless of the environment. The inclusion of an easy-to-use on-screen interface makes setup straightforward for users, allowing for quick adjustments to settings and preferences.

In terms of design, the SA-XR58 boasts a sleek and modern aesthetic that can fit into any home theater setup. The front panel includes direct access buttons and a clear display, ensuring ease of use during operation.

Overall, the Panasonic SA-XR58 stands out with its blend of advanced digital technology, powerful amplification, and user-friendly features. It not only caters to audiophiles looking for high-quality sound but also provides an exceptional experience for casual listeners, making it a versatile addition to any audio system. With its robust capabilities and reliable performance, it continues to be a respected choice for those looking to elevate their home entertainment systems.
Top Page Image Contents