Panasonic SA-XR58 manual Speaker and size Settings, Distance, LR BI-WIRE setting, Low-pass filter

Page 27

2a Select and confirm.

SUBW: Subwoofer

LR: Front speakers

C:Center speaker

Speaker and size

settings

•Set the speakers and their sizes.

•Different speakers play different ranges. Change the size setting to achieve a satisfactory bass.

•Only change this setting if auto speaker setup has not produced a satisfactory result.

2b Select the speaker you want to set and confirm.

3Change the setting and confirm.

When you have set the front speakers (LR) as “LARGE”

•The subwoofer outputs bass even when you are playing analogue or PCM stereo sources.

•The sound recorded for the LFE (low frequency effect) channel is played through the subwoofer.

For your reference

•The “SMALL” setting allows you to set the low pass filter to suit the frequency range of your speakers. (➡ below)

•The following settings are automatic: “SUBW” (subwoofer) is set to “YES” if you set “LR” (front) to “SMALL”. “LR” is set to “LARGE” if you set “SUBW” to “NO”.

•“SB” (surround back) have the same size setting as “S” (surround).

S:Surround speakers

SB: Surround back speakers

SUBW (Subwoofer)

NO: Unconnected YES : Connected (factory setting)

LR (Front), C (Center), S (Surround)

NONE: Speakers not connected (center or surround)

SMALL : Speakers that cannot adequately reproduce the bass range (sufficient for most speakers when using a subwoofer) (factory setting).

LARGE: Speakers that can reproduce a full sound range, down to 20 Hz.

SB (Surround back) NONE: Not connected 1-SPK:1 connected

2-SPK :2 connected (factory setting) RETURN (Returns to the main menu)

Receiver settings ENGLISH

Distance

Enter the distance of the speakers from the seating position so that the sound from all the speakers (except for the subwoofer) reaches you at the same time.

2a Select and confirm.

2b Select the speaker you want to set and confirm.

m

3Select the distance

and confirm.

m

L, R: Front speakers

C: Center speaker

 

LS, RS: Surround speakers

SBL, SBR: Surround back

 

speakers

 

Adjustment range: 0.5 m to 15.0 m

 

Factory settings:

 

 

L, R (Front), C (Center)

 

3.0 m

LS, RS (Surround), SBL, SBR (Surround back)

1.5 m

Note

“OVER” appears if a speaker was detected as being more than 15.0 m away during auto speaker setup.

LR BI-WIRE setting

Change this setting if you have bi-wired your front speakers (➡ page 13).

2a Select and confirm.

3Select and confirm.

YES: You have bi-wired your front speakers

NO: You have not bi-wired your front speakers

Factory setting: NO

Low-pass filter

•Only necessary if you have set speaker size to “SMALL”

(➡ above).

•Small speakers are unable to reproduce the bass range adequately, so set the filter to match the range of your speakers so that more bass is output from the subwoofer.

•Only change this setting if auto speaker setup has not produced a satisfactory result.

2a Select and confirm.

3Select the cut-off frequency and confirm. The settings are 80 Hz, 100 Hz, 120 Hz,

140 Hz, 160 Hz, 180 Hz, and 200 Hz.

Factory setting: 100

For your reference

The filter applies to any speakers you have set as “SMALL”.

Auto Setup

•Reset the settings done in auto speaker setup.

•Choose whether to check speaker polarity during auto speaker setup. (If polarity is reversed, a minus sign (-) appears besides the distance reading, for example, “L 3.0 -”

to show that polarity has been corrected.)

Reset

 

Polarity

2a Select and confirm.

 

2a Select and confirm.

2b Select and confirm.

YES: Reset all

 

auto speaker

2bSelect and confirm.

 

setup settings

 

 

NO: To cancel

 

3 Select and confirm.

Factory setting:

3 Select and confirm.

 

NO

 

CHECK NO: Do not check polarity CHECK YES: To check polarity

Factory setting:

CHECK YES

27

RQTV0156

Page 26 Page 28
Image 27
Page 26 Page 28
Contents AV Control Receiver Safety precautions Table of contents Remote control Control guideMain unit and display For your reference Connecting your television and DVD equipmentHigh-quality audio and video simply with Hdmi connection Connection cableHome Theater connections English Home Theater connectionsAudio OUT Coaxial Optical Connection with 21-pin scart cableRear panel Digital VideoSee also Playing DVD-Audio Analogue audio connectionsFront Surround DVD player DVD recorderDVD/VHS Common OUT Connecting a combination DVD recorder/VCRDigital Audio OUT Optical Audio OUT OpticalConnecting other equipment Connecting otherEquipment English Equipment Connecting the antennas and AC mains leadSpeaker connections English Connecting speakersNumber Placement Speaker connectionsConnecting biwireable speakers Connecting a second pair of front speakersSpeaker Auto speaker setup Before playbackBefore playback English Turn on the unit Press Start performing auto speaker setupAuto speaker setup finishes Before playbackTroubleshooting for auto speaker setup Message Solutions PagesBefore playback Speaker output and level Automatic speaker detectionEnjoying Home Theater features Features EnglishBasic play Enjoying Home Theater featuresDigital signals this unit can play Signal indicatorsUsing Playback optionsPlayback options English One-touch Home Theater Using Hdavi ControlTMUsing Hdavi ControlTM English To turn off Hdavi Control, Hdmi settings,Dolby Pro LogicΙΙx Adjusting the Dolby Pro LogicΙΙx Music modeSurround sound Surround soundPress Effect to select C-IMAGE, then press Adjusting the NEO6 Music modeSurround sound English Press NEO6 to select one of the following modesPress Movie to select one of the following modes Surround soundSFC Sound Field Control Press Music to select one of the following modesPress Then press To adjust the level Adjusting the effect levelBasic operations Receiver settingsSettings English ReceiverDistance Speaker and size SettingsLR BI-WIRE setting Auto SetupBi-amp settings Receiver settingsDigital input settings Input signalResetting factory Settings Hdmi settingsAMP off Clear audio at low Volume Delaying audioTurn To select the item Sound effects/Other functionsSound Enter the menuSound effects Manual tuning On the remote control Direct tuning On the main unitRadio Selecting channels Preset tuningPresetting stations RadioRDS broadcasts Changing the displayTelevision DVD recorder/DVD player Using the remote control with other equipmentUsing the remote control With otherCD player Using the remote control with other equipmentControl UsingOther WithHelp messages Specifications DIN 45Specifications/Help messages English Message Causes and solutionsTroubleshooting guide Troubleshooting guide EnglishHdmi For business users in the European Union Supplied accessoriesMaintenance Web Site http//panasonic.net

SA-XR58 specifications

The Panasonic SA-XR58 is a sophisticated digital AV receiver that combines cutting-edge technology with high-quality sound performance, making it an exceptional choice for home theater enthusiasts. Launched as part of Panasonic’s renowned XR series, this receiver highlights innovative digital technology and careful engineering, achieving a captivating audio experience.

One of the standout features of the SA-XR58 is its Class D amplification. Unlike traditional Class A/B amplifiers that can be bulky and inefficient, the SA-XR58 utilizes a digital amplifier design that is lightweight and energy-efficient while delivering an impressive 100 watts per channel into 8 ohms. This allows users to enjoy rich, dynamic sound without the heat and power consumption associated with conventional amplifiers. The digital architecture also contributes to the clarity and precision in audio, ensuring a faithful reproduction of soundtracks and music.

The SA-XR58 supports a wide variety of audio formats, including Dolby Digital, DTS, and various PCM formats, enabling it to handle diverse content seamlessly. Additionally, with its integrated 7.1 channel surround sound capability, users can experience immersive audio that propels them right into the action of movies and games. The unit is equipped with multiple inputs, including HDMI, component video, and optical digital audio, providing flexibility for connecting numerous devices such as gaming consoles, Blu-ray players, and streaming boxes.

Another technological highlight of the SA-XR58 is its advanced audio processing capabilities. This receiver features a sophisticated equalizer that allows for fine-tuning of audio settings to match the acoustics of your room. This ensures optimal sound quality, regardless of the environment. The inclusion of an easy-to-use on-screen interface makes setup straightforward for users, allowing for quick adjustments to settings and preferences.

In terms of design, the SA-XR58 boasts a sleek and modern aesthetic that can fit into any home theater setup. The front panel includes direct access buttons and a clear display, ensuring ease of use during operation.

Overall, the Panasonic SA-XR58 stands out with its blend of advanced digital technology, powerful amplification, and user-friendly features. It not only caters to audiophiles looking for high-quality sound but also provides an exceptional experience for casual listeners, making it a versatile addition to any audio system. With its robust capabilities and reliable performance, it continues to be a respected choice for those looking to elevate their home entertainment systems.
Top Page Image Contents