Unmatched performance and comfort

3	4017
	4017
	page 1 of 4
Half and Full Facepiece Respirators
6000 Series, Reusable

Unmatched performance and comfort.

3M™ Half and Full Facepiece Respirators 6000 Series, Reusable offer the user comfort and convenience coupled with the cost savings of a reusable respirator.

Features/Benefits

• Used with 3M™ Filters and

Cartridges, these respirators are

among the lightest available

• The swept back design of the

cartridges improves balance

and visibility

• Remarkably comfortable,

soft, lightweight facepiece

Issue Date 03/24/03

	3
3	3
	3

The 3M™ Half and Full Facepiece Respirators 6000 Series, Reusable with replaceable cartridges/filters

	and easy-to-adjust head straps
• Reusable — just dispose of
	the cartridges/filters when
	used to capacity
•	The half facepiece design is
	available with a standard and
	drop down head harness
•	Can be disassembled, cleaned
	and reused
• NIOSH approved for negative
	pressure air purifying and
	positive pressure dual airline
	applications
•	Supplied with reclosable
	storage bag
•	The half and full facepieces are
	each available in 3 sizes (small,
	medium, large) to comfortably
	fit many faces

The 6000 Series respirators

can be used in dual airline mode:

•Available with both back- mounted and front-mounted breathing tubes

•Systems can be used in combination with NIOSH approved 3M™ 2000 Series Filters or 6000 Series Cartridges and P100 Filter/Cartridges

•Cartridge/filter connections provide negative and positive pressure capability in one respirator assembly

•Can be used on both high and low pressure systems*

•Wearer can disconnect the airline at the air regulating valve and the system is changed to a filters/ cartridges air purifying mode — then back to supplied air system with a simple reconnection of the airline

•Small diameter breathing tubes are simple to work with and easy to clean and decontaminate

!WARNING

These respirators help reduce exposure to certain airborne contaminants. Misuse may result in sickness or death. Before use, the wearer must read and understand User Instructions provided as a part of product packaging. Time use limitations may apply. For proper use, see supervisor, packaging or call 3M OH&ESD Technical Service, call 1-800-243-4630.

In Canada, call 1-800-267-4414 or 1-800-265-1840, ext. 6137.

* Employer must provide a minimum of Grade D breathing air in accordance with OSHA requirements.