[Precautions |
| When |
| Moving | the |
| .,__ n | When | unpluggmg |
| the | power | cords, | |||||||
|
|
|
|
|
|
|
|
|
| be sure to hold and pull on the plug | ||||||||||
n When | moving | the | machines, | be | Disconnect the plug. | portion. | Pulling | on | the | cord | portion | |||||||||
| may | cut | or | expose |
| the | internal | wires | ||||||||||||
sure | to | first | unplug | the | power | cords. |
|
| ||||||||||||
| and | cause | fire | or | electric |
| shock. |
| ||||||||||||
Moving | the | machines |
| with the | power |
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
cords | plugged | in may | damage | the |
|
|
|
|
|
|
|
|
|
|
|
| ||||
cords | and | cause | fire | or | electric |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
w Do not lean against |
| the | machine. | It | n | When | opening | the | cash | drawer, | be | |||||||||
may | fall | and | be | damaged. |
|
|
| careful |
| not | to | let | the | drawer | hit |
|
n Be sure to move large scale
machines with two or more people. In
addition, machines should be mobed
after first confirming that connecting
wires between machines and
externally connected wires, etc. have
been removed. Failure to observe
these precautions may result in injury.
Precaution
The following precautions will help to ensure that this machine will continue to function correctly.
@Try to avoid locations that have the following adverse conditions:
l | Temperatures | below 0°C and above 40°C | l | Direct sunlight |
* | Shared power | socket | * | Excessive vibration |
0Do not subject the weighing platter to sudden shocks.
@Do not press the keys too hard. Keys will operate correctly if they are touched lightly.
@Clean the cover and weighing platter by wiping with a dry cloth or a cloth soaked with detergent
and wrung out thoroughly. Never use thinner or other volatile solvent for cleaning.
0To ensure that the scale is operating correctly, place a known weight on the platter and check it for correct weight measurement. This should be done every morning before starting normal operations.
@At the end of the day, turn the power OFF, then clean and inspect the exterior of the scale.
@Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains interference (freezer cabinets etc.).
@USE ONLY TEC SPECIFIED media.
@I DO NOT STORE the media where they might be exposed to direct sunlight, high temperatures, high humidity, dust, or gas.
@ When moving the scale, take hold of the case and lift the scale. Never hold the remote unit.