Toshiba SL-5900, EMl-31015D, EM1-31015 manual Level Adjustment, Cleaning Print Head

EMl-31015D

8. LEVEL ADJUSTMENT

Set the scale on a stable and level surface. Level the scale by turning the adjustable legs so that the air bubble is inside the center circle.

@eve1Gauge@

CorrectIncorrect

When the air bubble moves toward the left side, turn the right adjustable legs clockwise.

When the air bubble moves toward rear, turn the front adjustable legs clockwise.

9.	CLEANING			THE	PRINT	HEAD
If the	print	head	is dirty,	clear printing	will not be produced.		It is recommended to clean the head
with	thermal	head	cleaner	everyday before starting		operation	using the following procedure:

1.Remove the printer cover and label cassette. Then push the head-up lever in the direction indicated by the allow.

the figure to the right with the thermal head cleaner.

Then set the label cassette, and push down the print head.

NOTE: Be careful not to damage the print head when cleaning.

hermal Head Cleaner

- 15 -