Volumes
Adjusting volumes!
Ringer volume
4 levels (high/middle/low/off) are available.
While the unit is idle, press or .
●If any documents are in the document entrance, you cannot adjust the ringer volume. Confirm that there are no documents in the entrance.
■To turn the ringer off:
1.Press repeatedly until the following message is displayed.
Display: RINGER OFF= OK?
YES:SET/NO:STOP
2.Press SET .
●To turn the ringer back on, press .
■While the ringer volume is set to off:
The display will show the following message.
RINGER OFF
When a call is received, the unit will not ring and will display the following.
INCOMING CALL
Handset receiver volume
5 levels (high to low) are available.
While using the handset, press or .
Monitor volume
8 levels (high to low) are available.
While using the monitor, press or .
Display | / |
| SET |
Melody ringer
●You can select one of the four melodies instead of the bell. Change the setting (feature #17 on page 56). The melody you selected will sound when the unit receives a call.
21