Model WP-60/65/70
QUICK START GUIDE
1Prepare the Reservoir:
Fill | Remove the reservoir |
from base and fill with | |
| lukewarm water. |
| Replace |
Replace the reservoir onto the base,
PRESSING DOWN FIRMLY 
to ensure full seating. 
3Prime Unit (First Time Use Only):
2Select and Insert Tip:
No
Gap
Press tip firmly into
handle. When tip is Insert properly inserted there
should be no gap between
control knob and tip. To
remove tip, simultaneously
hold control knob down and lift tip up.
4Adjust Pressure and Pause Control:
Prior to Very First Use of Unit, Prime Unit: Set pressure control slide switch on handle to high, point the handle and tip into sink. Turn unit ON until water flows from the handle, turn unit OFF.
High
For first time users, adjust pressure control to lowest position. Gradually increase pressure as you prefer.
Low
You can temporarily stop water flow by pressing the pause button on the handle.
PAUSE
continued on back