Fitting / removing brush heads
To remove the brush head 1, turn it clockwise and then pull it upwards.
To fit the brush head 1 place it slightly offset on the hand element and then turn it
The brush head 1 must engage on being put back on. To avoid damage to the appliance, use only original brush heads. (For replacement brush heads, see the order card)
Operation
This toothbrush has 3 different performing levels:
-“Clean”: normal speed level, orange LED 8 For cleaning the teeth.
-“Soft”: slow speed level, green LED 7
For cleaning the teeth of people with sensitive gums.
-“Pulse”: variable speed levels, yellow LED 6 For massaging the gums.
•Press the on/off switch 9 once to switch the level “Clean” on. The “Clean” LED 8 glows.
•Press once more to switch to the level “Soft”. The “Soft” LED 7 glows.
•Press it a third time to switch to the level “Pulse”. The “Pulse” LED 6 glows.
•To switch the toothbrush off, press once more on the on/ off switch 9.
Brushing one’s teeth
Warning
Due to the unaccustomed operation some gum bleeding may initially occur, this is normal. Should this continue for more than two weeks, consult your dentist.
- 6 -