com.interplak.www website: our at us Visit
.using before carefully book instruction the read always product, this of enjoyment continued and safety your For
DPI8 Model • Manual Instruction
H S U R B H OT TO N I - G U L P T C E R I D
®
Using the Interplak® Direct
6 Simple Steps:
1.Charge the lower battery unit.
IMPORTANT NOTE: The plug blades and face must be clean and dry before plugging into AC outlet to reduce risk of burns, electrocution, fire or injury. Allow base to charge for at least 24 hours before first use.
Note: If the outlet is controlled by a wall switch, be sure the switch is always on for a continuous charge. Plug the lower battery unit into a live outlet and leave it charging for 24 hours. Use only a 120v, 60Hz outlet.
2.After recharging:
Take lower battery unit out of outlet and line up prongs on base to the opening in the handle and push together until
in place. The plug blades are polarized (one blade is wide) and can go into the handle only one way. Push together until there is no gap between handle and base. IMPORTANT NOTE: The unit will not function with a slight gap between the handle and the base. Make sure that the base is fully pushed in.
3.Attach the brush head.
Attach and remove with just a simple twist.
4.Wet the bristles, apply a
Clear gel or low abrasion formulations are strongly recommended to enhance the life and performance of your brush head, but pastes may also be used. To avoid splashing, switch the power on after placing the brush head in your mouth.